Find your code

Maytag and KitchenAid: When Whirlpool’s Error Codes Apply to Your Machine

Maytag, KitchenAid and Whirlpool publish many of the same code pages, sometimes word for word. Where the three brands really share a code, where they do not, and how to look up a Maytag or KitchenAid code without borrowing the wrong meaning.

By ApplianceCodeHQ Editorial Updated

In this guide
  1. One platform, three badges
  2. Where the brands visibly share a code
  3. Where borrowing a Whirlpool page goes wrong
  4. A lookup order that avoids the wrong answer
  5. What shared pages do not tell you
  6. Frequently asked questions

Short answer: often, but only when the brand itself says so for the same kind of appliance. Maytag and KitchenAid belong to the same company as Whirlpool, and their US help sites are built from the same library. For dryers, Maytag’s official code index lists the same codes as Whirlpool’s, and individual pages give the same meaning and the same reset routine with a different phone number. Front-load washers show the same picture between Whirlpool and Maytag. For dishwashers, the Whirlpool, Maytag and KitchenAid sites carry one shared page on reading codes, with the same table. But the overlap ends where a brand does not publish a section at all, and the same characters on a different appliance can mean something unrelated. The safe habit is to look the code up on your own brand’s site, for your own type of machine, and to use the Whirlpool page only as a cross-check.

One platform, three badges

It helps to think of the code as belonging to the control board, not to the logo on the front. When a company uses one family of controls across several brands, the board reports faults in one vocabulary, and the help pages describe that vocabulary once and publish it under each brand. You can see this in the structure of the URLs: producthelp.whirlpool.com, producthelp.maytag.com and producthelp.kitchenaid.com use the same folder paths for the same topics. What changes from brand to brand is mostly the wording around the code, the customer service line and which products the brand currently sells.

Where the brands visibly share a code

We compared official pages on 2026-11-05. The table below lists only cases where each brand published the page itself. It is a record of what we found, not a promise that every model under these badges behaves the same way.

What the three US help sites publish, checked 2026-11-05
TopicWhirlpoolMaytagKitchenAid
Dryer code index (AF or Check Vent, E1–E3, F1 E1 to FC E1, L2, PF and others) Yes Same list of codes No laundry index found at the matching address
Dryer F3 E1: exhaust thermistor, one-minute breaker reset, service if it returns Yes, service line 1-866-698-2538 Same meaning and steps, service line 1-800-344-1274 Not checked: no matching page
Dryer Check Vent / AF and vent test kit W11224254 Yes Same steps and the same test kit Not checked
Front-load washer code index (F0 E1 to F9 E1, FC E0, FH, plus 12 letter and message codes) Yes, 54 articles Same 54 articles No laundry section found on the KitchenAid help site
Dishwasher “Error Codes - Reading” page: F#E# display and flashing clean light Yes Same page Same page, with KitchenAid named in the text
Dishwasher table: F8E4, F7E2, F9E1, F6E1, H20 Yes Same five rows Same five rows

On the dishwasher side the overlap is easiest to see. All three pages explain that a digital display shows the fault as F#E#, and that a flashing clean light is a two-part count: the first group of flashes is the Function number, a pause of about one to two seconds, then the second group is the Error number, with a longer pause of about five seconds before the pattern repeats. The table rows are identical across the three: F8E4 water in the drip tray, F7E2 wash motor, F9E1 long drain, F6E1 user interface or main control, H20 not detecting water. Each version carries its own brand in the title, so the KitchenAid page reads as KitchenAid’s explanation of KitchenAid codes, not a borrowed Whirlpool article. That is the clearest kind of confirmation you can get from outside: the brand has published the meaning as its own.

Where borrowing a Whirlpool page goes wrong

Laundry is where KitchenAid drops out of the comparison. Maytag’s front-load washer index lists the same 54 articles as Whirlpool’s, from F0 E1 or rL through FC E0 and FH, plus the letter codes such as dET, Lo FL and SUD. The KitchenAid help site, by contrast, had no laundry section at the address where the other two keep theirs when we checked. A KitchenAid washer or dryer in your basement may well run on a related control, but there is no KitchenAid page that says so, so we would not apply Whirlpool laundry meanings to it without the Use & Care Guide for that exact model. The same caution applies in the other direction for any product a brand has stopped selling: an index describes the machines the brand supports today.

The second trap is the appliance type. KitchenAid’s help page for an electric cooktop explains F4 as a pot or pan sitting too close to the control panel, fixed by centering the cookware or moving it off and waiting about five minutes for the panel to clear. On a Whirlpool dryer, F4 E1 points to the heater system, F4 E3 to restricted airflow and F4 E4 to low line voltage. Same family, same leading characters, unrelated meanings. Our page on appliance code lookalikes collects more examples of this across brands; the rule is the same here: a code is only meaningful together with the appliance type and the full set of characters.

A lookup order that avoids the wrong answer

  1. Read the full model number

    Use the label, not the badge. The model number tells you the appliance type and lets you request the right Use & Care Guide; our model number guide shows where the label usually sits.

  2. Search your own brand’s help site first

    Use producthelp.maytag.com for a Maytag and producthelp.kitchenaid.com for a KitchenAid, in the section for your appliance type.

  3. Use the Whirlpool page only to compare

    If your brand has no page for the code, a Whirlpool page for the same appliance type can show you how the code family works. Treat it as context, not as confirmation.

  4. Check the manual for your model

    The troubleshooting table in the Use & Care Guide outranks any general page, including ours.

  5. Call your brand’s line, not Whirlpool’s

    Service lines differ by brand. Maytag’s dryer pages list 1-800-344-1274; Whirlpool’s list 1-866-698-2538.

What shared pages do not tell you

A shared meaning is not a shared repair. Even where the code is the same, the part behind it, its location and the procedure to reach it can differ between models, and the help pages stop at the owner steps: clean, check, reset once, request service. Shared pages also do not imply the same warranty terms or the same service network. And a brand’s current product line can change: a page that exists for one brand and appliance today says nothing about a machine that brand made ten years ago. When in doubt, the exact characters on the display and the model number are what a technician needs from you.

Frequently asked questions

Can I use a Whirlpool dryer code page for my Maytag dryer?

For the codes we compared, Maytag publishes the same list and the same meanings, so the Whirlpool page agrees with Maytag’s. Still read the Maytag page itself, because that is the brand’s confirmation and it lists the right service line.

My KitchenAid dishwasher blinks the clean light. Which table applies?

KitchenAid’s own “Error Codes - Reading” page explains the two-part flash count and lists five codes. Codes beyond those five are model-specific; use your manual.

Is Amana or JennAir covered here?

No. We compared only the Maytag, KitchenAid and Whirlpool help sites. Do not extend these findings to other brands without their own pages.

Why does the same code mean different things on my range and my dryer?

Each appliance type has its own control and its own code map. The letters and numbers are reused, the meanings are not.

Sources: According to the manufacturers; this is a comparison of their published help pages, not an independent test of any model.
Maytag Product Help: Dryer error codes — checked 2026-11-05.
Maytag Product Help: F3 E1 — Dryer — checked 2026-11-05.
Whirlpool Product Help: Dryer error codes — checked 2026-11-05.
KitchenAid Product Help: Dishwasher Error Codes - Reading — checked 2026-11-05.
Maytag Product Help: Dishwasher Error Codes - Reading — checked 2026-11-05.
Whirlpool Product Help: Dishwasher Error Codes - Reading — checked 2026-11-05.
Maytag Product Help: Front load washer error codes — checked 2026-11-05.
Whirlpool Product Help: Front load washer error codes — checked 2026-11-05.
KitchenAid Product Help: F4 — Electric Cooktop — checked 2026-11-05.

Find the model number first

Every lookup on this page starts from the label, not the badge. See where manufacturers put it.

Find my model number

Related code guides

Related codes & guides

Chart

Washers

Whirlpool Washer Error Codes

Compare thirteen Whirlpool front-load code pages for water, doors, balance, foam and dispenser messages, with exact…