Error code
Bosch dishwasher · E15
Bosch dishwasher E15 Error Code
Water in the base — leak protection is on.
Call a proWhat it means
Drain error — the drain hose is kinked or the filters are blocked.
Easy fix · 15–30 minE24 means the dishwasher is not draining properly. Bosch names the usual suspects: a drain hose that is kinked or blocked, filters at the bottom of the tub that need cleaning, and — after a new garbage disposal was installed — the knockout plug in the disposal's dishwasher inlet that the installer forgot to remove. All three are things you can check yourself.
| Cause | Difficulty |
|---|---|
| Filters at the bottom of the tub clogged with food debris | Easy fix |
| Drain hose kinked or blocked behind the dishwasher or under the sink | Easy fix |
| Knockout plug still in a newly installed garbage disposal | Moderate |
| Blocked sink drain or disposal | Easy fix |
Turn off the breaker or unplug the dishwasher.
Take out the bottom rack, twist out the filter assembly, rinse it under running water and scrub off grease. Put it back until it locks.
Under the sink, look for kinks or a crushed section of the drain hose and straighten it.
Run the garbage disposal to clear it. If the disposal is new, make sure the knockout plug in its dishwasher inlet was removed.
Restore power and run a short cycle to see whether the water drains.
Bosch has four codes around filtering and draining, and the owner part shrinks from one to the next. E22 means the filter itself is blocked and is fixed by washing it. E24 means the dishwasher is not draining because the drain filter is blocked, so the filter is again the first check, followed by the hose and the disposal connection. E25 moves to the pump: blocked, or its cover loose or missing. E23 means the drain pump is blocked, clogged or faulty, and Bosch sends it straight to Customer Support. Newer panels show E6103 for the E24 description.
| Code | Bosch meaning | Owner part |
|---|---|---|
| E22 | Filter blocked | Wash the filter |
| E24 | Not draining, drain filter blocked | Filter, drain hose, disposal plug, pump cover |
| E25 | Drain pump blocked or cover loose/missing | Cover and debris per the manual |
| E23 | Drain pump blocked, clogged or faulty | Bosch support |
One wording issue remains on Bosch’s E24 page, rechecked on 2026-10-26: its cause list names the drain hose, but its first numbered step says to check the inlet hose for kinks or damage. A kinked supply hose is the E16/E17 situation (water cannot enter), so this page follows the cause list and checks the drain side. Bosch’s E24 steps also ask you to make sure the pump cover under the filter is secure.
Both are drain codes. E24 usually points to the hose or filters, E25 to a blocked drain pump or a loose pump cover.
New disposals ship with a plug in the dishwasher inlet. Until it is knocked out, the dishwasher cannot drain into the disposal.
Sources: According to the manufacturer; this is not an independent diagnosis.
Bosch US: Dishwasher Error Codes — checked 2026-10-26.
Bosch US: Dishwasher Error Code E24 — checked 2026-10-26.
Bosch US: How to Properly Clean Your Dishwasher Filter — checked 2026-10-26.
Codes can differ between model generations — check the troubleshooting table in the owner’s manual of your model.
Routine maintenance and the Bosch reset, and when each applies.
Error code
Bosch dishwasher · E15
Water in the base — leak protection is on.
Call a pro
Error code
Bosch dishwasher · E25
Drain pump blocked, or the pump cover is loose.
Moderate
Error code
LG dishwasher · OE
The dishwasher is not draining correctly.
Check model first
Error code
LG dishwasher · IE
Not enough water is reaching the dishwasher.
Check model first
Error code
LG dishwasher · AE
Leakage has activated the dishwasher’s leak-detection system.
Call a pro
Error code
Samsung dishwasher · 4C
The dishwasher is not receiving water at the required pressure or temperature.
Check model first
Error code
Samsung dishwasher · 5C
The dishwasher cannot drain.
Check model first
Error code
Samsung dishwasher · LC
The leak sensor detects moisture; WaterWall models also have a reflector-related exception.
Call a proDishwashers
Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…
Dishwashers
Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…
Guide
Symptom guide
Use the drain code and model manual to check a dishwasher’s sink connection, visible hose and removable filter without…
Error code
LG dishwasher · FE
Too much water is being detected; the named LG manual identifies an excess-water condition.
Call a pro
Error code
LG dishwasher · HE
The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.
Call a pro
Error code
LG dishwasher · tE
LG identifies a temperature-sensor error in its US dishwasher code guide.
Call a pro
Error code
LG dishwasher · LE
The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.
Call a pro
Error code
LG dishwasher · nE
The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.
Call a pro
Error code
LG dishwasher · bE
LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.
Check model first
Error code
Samsung dishwasher · 1E
1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.
Check model first
Error code
Samsung dishwasher · 3C
Samsung identifies a pump-operation error.
Call a pro
Error code
Samsung dishwasher · 3E
The dishwasher reports that its incoming water is too hot.
Call a pro
Error code
Samsung dishwasher · 7E
On the covered WaterWall design, the reflector cannot move correctly.
Check model first
Error code
Samsung dishwasher · 9E
The dishwasher reports an insufficient water level.
Check model first
Error code
Samsung dishwasher · bE
The control panel detects a stuck button; Samsung groups bE and 6E.
Check model first
Error code
Samsung dishwasher · HE
Samsung labels HE a heater error and describes incorrect detection of the internal temperature.
Check model first
Error code
Samsung dishwasher · OC
The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.
Call a pro
Error code
Samsung dishwasher · tE
Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.
Check model first
Guide
Symptom guide
Separate an interrupted wash from food residue, an unopened detergent cup or white film. Use safe loading and…
Guide
Symptom guide
Wet dishes do not identify a failed heater. Check whether the wash finished, which drying system your model uses and…
Guide
Symptom guide
Separate a dark control panel from a powered dishwasher that will not begin a wash. Preserve codes, check normal door…
Guide
Symptom guide
Foam needs a product and model check. Stop adding chemicals, distinguish LG bE from Samsung’s button code and address…
Dishwashers
Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…
Dishwashers
Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…
Error code
LG dishwasher · PE
According to LG, PE reports a water-level-sensor issue on certain older dishwashers.
Call a pro
Error code
LG dishwasher · F31
According to LG, F31 means the Heat Dry fan motor is not operating on a Dynamic Heat Dry model.
Call a pro
Error code
LG dishwasher · F35
According to LG, F35 means temperatures of Heat Dry components cannot be measured on applicable Dynamic Heat Dry models.
Call a pro
Error code
LG dishwasher · F37
According to LG, F37 reports that the Auto Open Door function is not working.
Call a pro
Error code
Samsung dishwasher · CE
According to Samsung, CE means the dishwasher control panel cannot communicate with the rest of the appliance.
Check model first
Error code
Samsung dishwasher · HC
According to Samsung, HC reports excessive temperature inside the dishwasher.
Check model first
Error code
Samsung dishwasher · PC
According to Samsung, PC reports that the Zone Wash function is not operating correctly.
Check model first
Error code
Samsung dishwasher · PE
According to Samsung, PE reports a problem with the dishwasher Half Load function.
Check model first
Guide
Symptom guide
Check automatic dishwasher opening only on equipped models. Separate Samsung AutoRelease settings and clearance from…
Guide
Symptom guide
LG dishwasher CL can indicate Control Lock rather than a fault. Use the model’s labeled release controls and keep…
Thank you! Your feedback helps us make this page better.
Could not send. Please try again.