Find your code

LG Dishwasher FE Error Code

By ApplianceCodeHQ Editorial Updated

FE

What it means

Too much water is being detected; the named LG manual identifies an excess-water condition.

Call a pro

Jump to the fix

Applies to these models and systems

The cited LG manual MFL69261715, Rev.00_112816, lists LDT779#**, LDP679#**, LDP567#**, LDT566#** and LDF554#** series on its cover. Its printed page 50 supplies the named-model reference here. For another model, use its own US manual before applying a procedure. LG’s broader support guide groups FE with leakage and overfilling; that grouping does not make AE and FE identical on every model.

What FE means

According to the manufacturer, FE on the listed series concerns excessive water. An owner cannot identify the failed component from those two letters. Describe what you actually see: an FE display, water remaining inside, or water reaching the floor. Keep these observations separate; absence of a visible puddle is not permission to continue washing through an excess-water warning.

Documented conditions and next steps

Manufacturer guidance; no failure probabilities assigned
ConditionWhat it means for your next step
FE on a model covered by the cited manual Use the excess-water service path. Do not substitute a water-shortage procedure for IE.
Water escaping or still entering Prioritize safe isolation and help. Another test cycle adds water before the condition has been assessed.
Different model or a display that could read AE Save a photo and confirm the matching manual. Shared troubleshooting headings are not a compatibility list.

Safe checks before a repair

  1. Record before changing controls

    Photograph the whole display and note whether the warning appeared during filling, washing or draining. Keep the full model number for support.

  2. Stop operation safely

    The named-model manual directs owners to turn off the water supply and contact LG. Close an accessible shutoff only if you can reach it safely without moving the appliance.

  3. Keep clear of wet electrical areas

    If isolation is possible from a dry location, turn off the dishwasher’s power. Do not touch a wet plug or reach into standing water to find a connection.

  4. Prepare a factual service report

    Report continued filling, visible leakage and any recent installation work. Do not remove the toe panel or disconnect a hose to investigate.

Frequently asked questions

Does FE prove that the inlet valve is bad?

No. FE describes the reported condition, not a confirmed failed part. Internal diagnosis belongs with service.

Is FE the same as LG dishwasher IE?

No. The cited FE entry concerns excess water; IE is an inlet or water-supply entry.

Can I drain it by loosening a hose?

Do not disconnect a full or connected dishwasher. Use the model’s permitted controls and professional assistance.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
LG USA: Dishwasher — Guide to Error Codes — checked 2026-10-22.
LG USA: Dishwasher owner manual MFL69261715 — checked 2026-10-22.

LG Dishwasher error codes

Keep the full model and complete display with the appliance type when choosing a procedure.

Open the reference

Related codes and next steps

Each reference has its own model and service limits.

Related codes & guides

Error code

Bosch dishwasher · E24

Bosch dishwasher E24 Error Code

Drain error — the drain hose is kinked or the filters are blocked.

Easy fix · 15–30 min
Error code

LG dishwasher · AE

LG dishwasher AE Error Code

Leakage has activated the dishwasher’s leak-detection system.

Call a pro
Error code

Samsung dishwasher · 4C

Samsung dishwasher 4C Error Code

The dishwasher is not receiving water at the required pressure or temperature.

Check model first
Error code

Samsung dishwasher · LC

Samsung dishwasher LC Error Code

The leak sensor detects moisture; WaterWall models also have a reflector-related exception.

Call a pro
Chart

Dishwashers

LG Dishwasher Error Codes

Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…

Chart

Dishwashers

Samsung Dishwasher Error Codes

Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…

Error code

LG dishwasher · HE

LG Dishwasher HE Error Code

The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.

Call a pro
Error code

LG dishwasher · tE

LG Dishwasher tE Error Code

LG identifies a temperature-sensor error in its US dishwasher code guide.

Call a pro
Error code

LG dishwasher · LE

LG Dishwasher LE Error Code

The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.

Call a pro
Error code

LG dishwasher · nE

LG Dishwasher nE Error Code

The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.

Call a pro
Error code

LG dishwasher · bE

LG Dishwasher bE Error Code

LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.

Check model first
Error code

Samsung dishwasher · 1E

Samsung Dishwasher 1E Error Code

1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.

Check model first
Error code

Samsung dishwasher · 7E

Samsung Dishwasher 7E Error Code

On the covered WaterWall design, the reflector cannot move correctly.

Check model first
Error code

Samsung dishwasher · bE

Samsung Dishwasher bE Error Code

The control panel detects a stuck button; Samsung groups bE and 6E.

Check model first
Error code

Samsung dishwasher · HE

Samsung Dishwasher HE Error Code

Samsung labels HE a heater error and describes incorrect detection of the internal temperature.

Check model first
Error code

Samsung dishwasher · OC

Samsung Dishwasher OC Error Code

The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.

Call a pro
Error code

Samsung dishwasher · tE

Samsung Dishwasher tE Error Code

Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.

Check model first
Chart

Dishwashers

Dishwasher Error Codes by Brand

Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…

Chart

Dishwashers

Bosch Dishwasher Error Codes

Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…

Error code

LG dishwasher · PE

LG Dishwasher PE Error Code

According to LG, PE reports a water-level-sensor issue on certain older dishwashers.

Call a pro
Error code

LG dishwasher · F31

LG Dishwasher F31 Error Code

According to LG, F31 means the Heat Dry fan motor is not operating on a Dynamic Heat Dry model.

Call a pro
Error code

LG dishwasher · F35

LG Dishwasher F35 Error Code

According to LG, F35 means temperatures of Heat Dry components cannot be measured on applicable Dynamic Heat Dry models.

Call a pro
Error code

LG dishwasher · F37

LG Dishwasher F37 Error Code

According to LG, F37 reports that the Auto Open Door function is not working.

Call a pro
Error code

Samsung dishwasher · CE

Samsung Dishwasher CE Error Code

According to Samsung, CE means the dishwasher control panel cannot communicate with the rest of the appliance.

Check model first
Error code

Samsung dishwasher · HC

Samsung Dishwasher HC Error Code

According to Samsung, HC reports excessive temperature inside the dishwasher.

Check model first
Error code

Samsung dishwasher · PC

Samsung Dishwasher PC Error Code

According to Samsung, PC reports that the Zone Wash function is not operating correctly.

Check model first
Error code

Samsung dishwasher · PE

Samsung Dishwasher PE Error Code

According to Samsung, PE reports a problem with the dishwasher Half Load function.

Check model first

Other codes