Guide
Symptom guide
How to Clean a Dishwasher Filter: Bosch, LG, Samsung
A clogged filter causes filter and drain codes, poor cleaning and odors. How Bosch, LG and Samsung filters come out, how…
Check automatic dishwasher opening only on equipped models. Separate Samsung AutoRelease settings and clearance from LG F37 and leave mechanism repairs to service.
A dishwasher door that stays closed at the end of a cycle is not automatically broken. First establish whether the model has automatic opening and whether that feature is selected for the cycle. Samsung calls its feature AutoRelease; LG’s code guidance refers to Auto Open Door. Their controls, mechanisms and fault instructions are not interchangeable.
This guide uses Samsung US AutoRelease troubleshooting and LG US F37 guidance. It does not assign an opening feature to every dishwasher from either brand. Check the exact owner’s manual for feature availability, compatible cycles and settings. A manually operated door on a model without automatic opening should remain outside this diagnostic path.
| What you see | Relevant next step |
|---|---|
| Samsung AutoRelease-equipped model, no code | Check the setting and visible opening clearance. |
| LG F37 | Use the dedicated Auto Open Door error page and service boundary. |
| Door catches on cabinetry | Arrange installer assessment rather than forcing it. |
| Dishes are wet, with normal door behavior | Use the drying-performance guide; door motion alone does not explain every drying result. |
For Samsung AutoRelease, verify that the setting is enabled using the exact panel or menu instructions. Do not copy another model’s button sequence.
Record whether the cycle actually finished and whether a code appeared. Do not interrupt a hot cycle just to test door movement.
With the dishwasher stopped and cool, check whether an ordinary loose object or cabinetry blocks the opening path. Move only safe loose items.
Samsung includes level installation and clearance in its checks and recommends professional installation. Have an installer correct fit rather than moving a built-in unit yourself.
Photograph the panel setting, the model label and any visible cabinet interference. Note whether automatic opening worked previously and whether the behavior changed after installation work. These details help separate a settings question from a fit issue. They do not prove a particular actuator or control has failed, and this guide supplies no replacement-part diagnosis.
No. Feature availability and supported cycles depend on the exact model.
Do not assist or force the mechanism. Use normal manual opening only as the owner’s manual permits.
No. Drying performance has its own load, cycle and model considerations.
Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: AutoRelease door does not open automatically — checked 2026-10-22.
LG USA: Dishwasher drying-feature and control codes — checked 2026-10-22.
Keep the model and complete display with every procedure.
Guide
Symptom guide
A clogged filter causes filter and drain codes, poor cleaning and odors. How Bosch, LG and Samsung filters come out, how…
Guide
Symptom guide
Two different Bosch resets: cancel a running cycle with the Reset or Start button held about 4 seconds, or reset power…
Error code
Bosch dishwasher · E15
Water in the base — leak protection is on.
Call a pro
Error code
Bosch dishwasher · E24
Drain error — the drain hose is kinked or the filters are blocked.
Easy fix · 15–30 min
Error code
Bosch dishwasher · E25
Drain pump blocked, or the pump cover is loose.
Moderate
Error code
LG dishwasher · OE
The dishwasher is not draining correctly.
Check model first
Error code
LG dishwasher · IE
Not enough water is reaching the dishwasher.
Check model first
Error code
LG dishwasher · AE
Leakage has activated the dishwasher’s leak-detection system.
Call a pro
Error code
Samsung dishwasher · 4C
The dishwasher is not receiving water at the required pressure or temperature.
Check model first
Error code
Samsung dishwasher · 5C
The dishwasher cannot drain.
Check model first
Error code
Samsung dishwasher · LC
The leak sensor detects moisture; WaterWall models also have a reflector-related exception.
Call a proDishwashers
Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…
Dishwashers
Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…
Guide
Symptom guide
Use the drain code and model manual to check a dishwasher’s sink connection, visible hose and removable filter without…
Error code
LG dishwasher · FE
Too much water is being detected; the named LG manual identifies an excess-water condition.
Call a pro
Error code
LG dishwasher · HE
The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.
Call a pro
Error code
LG dishwasher · tE
LG identifies a temperature-sensor error in its US dishwasher code guide.
Call a pro
Error code
LG dishwasher · LE
The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.
Call a pro
Error code
LG dishwasher · nE
The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.
Call a pro
Error code
LG dishwasher · bE
LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.
Check model first
Error code
Samsung dishwasher · 1E
1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.
Check model first
Error code
Samsung dishwasher · 3C
Samsung identifies a pump-operation error.
Call a pro
Error code
Samsung dishwasher · 3E
The dishwasher reports that its incoming water is too hot.
Call a pro
Error code
Samsung dishwasher · 7E
On the covered WaterWall design, the reflector cannot move correctly.
Check model first
Error code
Samsung dishwasher · 9E
The dishwasher reports an insufficient water level.
Check model first
Error code
Samsung dishwasher · bE
The control panel detects a stuck button; Samsung groups bE and 6E.
Check model first
Error code
Samsung dishwasher · HE
Samsung labels HE a heater error and describes incorrect detection of the internal temperature.
Check model first
Error code
Samsung dishwasher · OC
The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.
Call a pro
Error code
Samsung dishwasher · tE
Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.
Check model first
Guide
Symptom guide
Separate an interrupted wash from food residue, an unopened detergent cup or white film. Use safe loading and…
Guide
Symptom guide
Wet dishes do not identify a failed heater. Check whether the wash finished, which drying system your model uses and…
Guide
Symptom guide
Separate a dark control panel from a powered dishwasher that will not begin a wash. Preserve codes, check normal door…
Guide
Symptom guide
Foam needs a product and model check. Stop adding chemicals, distinguish LG bE from Samsung’s button code and address…
Dishwashers
Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…
Dishwashers
Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…
Thank you! Your feedback helps us make this page better.
Could not send. Please try again.