Find your code

Samsung Dishwasher tE Error Code

By ApplianceCodeHQ Editorial Updated

tE

What it means

Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.

Check model first

Jump to the fix

Applies to these models and systems

This page uses Samsung US dishwasher support, which covers multiple designs rather than an exhaustive list of model numbers. Match your complete model and display to its US manual. Models without a digital display need their specific blinking-light interpretation. The US list gives tE its own heading. HE uses similar temperature-detection wording but is labeled a heater error; retain the actual code rather than combining those entries.

What tE means

According to Samsung, tE means the dishwasher is not detecting its internal temperature correctly. The display does not tell an owner whether a sensor, connection or another component must be replaced. Keep your report about the warning and cycle behavior. Feeling the door, touching the tub or changing supply temperature cannot verify the sensing system and may expose you to heat.

Documented conditions and next steps

Manufacturer guidance; no failure probabilities assigned
ConditionWhat it means for your next step
A clear tE display Use the temperature-sensor entry in the matching US manual, with Samsung’s limited owner response if applicable.
HE, HC or 3E instead Those are separate entries. Preserve the exact characters rather than selecting advice because it mentions temperature.
tE recurs after the permitted check Stop operation and arrange service; additional cycles are not a sensor test.

Safe checks before a repair

  1. Record before clearing anything

    Keep a photo, full model number and the cycle stage. Note whether the cycle stopped and whether another display appeared.

  2. Rule out an immediate reason to stop

    Do not continue if there is leakage, a burning smell, visible electrical damage or repeated breaker trips. Keep the cabinet and electrical covers closed.

  3. Use Samsung’s tE response only when safe

    The US entry permits an empty Normal cycle with dishwasher detergent. Use the model’s dispenser and product dosing instructions and observe whether the warning returns.

  4. Arrange service for recurrence

    Samsung directs turning off the circuit breaker and requesting service if tE persists. Use only a dry, safely accessible breaker and leave testing to the technician.

Frequently asked questions

Does tE tell me the water is definitely too hot?

The cited definition concerns incorrect temperature detection. Excessive internal temperature has a separate HC entry in Samsung’s list.

Can I replace the sensor without further diagnosis?

The code alone does not establish the correct failed part or repair procedure for your model.

Why keep HE and tE separate if the wording overlaps?

They are separate manufacturer headings and actual displays. Keeping the original code preserves information the technician may need.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dishwasher error codes — checked 2026-10-22.

Samsung Dishwasher error codes

Keep the full model and complete display with the appliance type when choosing a procedure.

Open the reference

Related codes and next steps

Each reference has its own model and service limits.

Related codes & guides

Error code

Bosch dishwasher · E24

Bosch dishwasher E24 Error Code

Drain error — the drain hose is kinked or the filters are blocked.

Easy fix · 15–30 min
Error code

LG dishwasher · AE

LG dishwasher AE Error Code

Leakage has activated the dishwasher’s leak-detection system.

Call a pro
Error code

Samsung dishwasher · 4C

Samsung dishwasher 4C Error Code

The dishwasher is not receiving water at the required pressure or temperature.

Check model first
Error code

Samsung dishwasher · LC

Samsung dishwasher LC Error Code

The leak sensor detects moisture; WaterWall models also have a reflector-related exception.

Call a pro
Chart

Dishwashers

LG Dishwasher Error Codes

Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…

Chart

Dishwashers

Samsung Dishwasher Error Codes

Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…

Error code

LG dishwasher · FE

LG Dishwasher FE Error Code

Too much water is being detected; the named LG manual identifies an excess-water condition.

Call a pro
Error code

LG dishwasher · HE

LG Dishwasher HE Error Code

The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.

Call a pro
Error code

LG dishwasher · tE

LG Dishwasher tE Error Code

LG identifies a temperature-sensor error in its US dishwasher code guide.

Call a pro
Error code

LG dishwasher · LE

LG Dishwasher LE Error Code

The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.

Call a pro
Error code

LG dishwasher · nE

LG Dishwasher nE Error Code

The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.

Call a pro
Error code

LG dishwasher · bE

LG Dishwasher bE Error Code

LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.

Check model first
Error code

Samsung dishwasher · 1E

Samsung Dishwasher 1E Error Code

1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.

Check model first
Error code

Samsung dishwasher · 7E

Samsung Dishwasher 7E Error Code

On the covered WaterWall design, the reflector cannot move correctly.

Check model first
Error code

Samsung dishwasher · bE

Samsung Dishwasher bE Error Code

The control panel detects a stuck button; Samsung groups bE and 6E.

Check model first
Error code

Samsung dishwasher · HE

Samsung Dishwasher HE Error Code

Samsung labels HE a heater error and describes incorrect detection of the internal temperature.

Check model first
Error code

Samsung dishwasher · OC

Samsung Dishwasher OC Error Code

The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.

Call a pro
Chart

Dishwashers

Dishwasher Error Codes by Brand

Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…

Chart

Dishwashers

Bosch Dishwasher Error Codes

Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…

Error code

LG dishwasher · PE

LG Dishwasher PE Error Code

According to LG, PE reports a water-level-sensor issue on certain older dishwashers.

Call a pro
Error code

LG dishwasher · F31

LG Dishwasher F31 Error Code

According to LG, F31 means the Heat Dry fan motor is not operating on a Dynamic Heat Dry model.

Call a pro
Error code

LG dishwasher · F35

LG Dishwasher F35 Error Code

According to LG, F35 means temperatures of Heat Dry components cannot be measured on applicable Dynamic Heat Dry models.

Call a pro
Error code

LG dishwasher · F37

LG Dishwasher F37 Error Code

According to LG, F37 reports that the Auto Open Door function is not working.

Call a pro
Error code

Samsung dishwasher · CE

Samsung Dishwasher CE Error Code

According to Samsung, CE means the dishwasher control panel cannot communicate with the rest of the appliance.

Check model first
Error code

Samsung dishwasher · HC

Samsung Dishwasher HC Error Code

According to Samsung, HC reports excessive temperature inside the dishwasher.

Check model first
Error code

Samsung dishwasher · PC

Samsung Dishwasher PC Error Code

According to Samsung, PC reports that the Zone Wash function is not operating correctly.

Check model first
Error code

Samsung dishwasher · PE

Samsung Dishwasher PE Error Code

According to Samsung, PE reports a problem with the dishwasher Half Load function.

Check model first

Other codes