Find your code

Dishwasher Not Cleaning: Loading, Detergent and Codes

Separate an interrupted wash from food residue, an unopened detergent cup or white film. Use safe loading and maintenance checks before assuming a failed part.

By ApplianceCodeHQ Editorial Updated

Dishwasher Not Cleaning: Loading, Detergent and Codes
In this guide
  1. Scope: use the exact LG or Samsung model
  2. Safe checks before another load
  3. Make the follow-up useful
  4. Frequently asked questions

Start by describing what “not clean” means. Food particles on plates, detergent still in its cup, a white film on glasses and dishes left in a stopped cycle are different observations. Take a photograph of the result and any display before another wash. Repeating a cycle with extra detergent can hide the original conditions without identifying the problem.

Scope: use the exact LG or Samsung model

This guide connects LG and Samsung US owner guidance. Rack layout, removable filters, wash mechanisms and cycle names vary. A Samsung WaterWall reflector check does not apply to a rotary system, and the general LG nE load advice does not override the cited series manual’s service direction. Use the owner manual to identify accessible maintenance parts before removing anything.

Keep the observed symptom separate from a replacement-part diagnosis
ObservationUseful next check
Cycle stopped or an error is present Use the complete code first; do not assume the dishwasher finished cleaning.
Detergent remains in the dispenser Check whether a large dish blocked the lid and whether product placement matches the manual.
Food remains after a completed cycle Review loading, selected cycle, measured detergent and permitted filter care.
White film rather than food Record the pattern; Samsung treats film separately from food particles. Do not assign a pump failure from appearance.

Safe checks before another load

  1. Confirm the cycle actually completed

    Read the display and note blinking indicators. A motor, temperature or WaterWall error takes priority over a general cleaning checklist.

  2. Compare loading with the rack diagram

    Leave the dispenser lid and intended spray path clear. Move a large plate or projecting utensil instead of forcing a wash mechanism around it.

  3. Review the product and its placement

    Use automatic-dishwasher detergent, the specified amount and the correct cup. LG flags moisture that can make detergent stick; use the model’s dry-dispenser instructions for pods.

  4. Choose the appropriate documented cycle

    Match the soil level and dish material to the manual. A rinse or special drying program is not automatically a full wash with detergent.

  5. Perform only permitted maintenance

    Stop, allow cooling and follow the exact filter or spray-arm care instructions. Do not unscrew a sealed assembly or reach blindly for debris. Reassemble every permitted removable part before use.

Make the follow-up useful

Record one clearly described result after the permitted correction: the selected cycle, detergent and amount, whether it finished, and which rack or items remained dirty. Do not report that the heater or pump is broken unless a technician has established that. If supply temperature or installation needs verification, use the model requirements and a qualified installer rather than adjusting household equipment as a trial.

Frequently asked questions

Should I double the detergent for dirty dishes?

No. Use the product and model instructions. Incorrect dosing creates another variable and can leave residue or foam.

Does white film prove that the dishwasher is broken?

No. Samsung separates film from food-residue troubleshooting. Record what remains and follow the matching guidance before assuming a mechanical fault.

Can I remove any filter that looks removable?

Use the exact manual. Similar-looking assemblies may have different owner-maintenance boundaries, and correct reassembly matters.

What if only the bottom rack is affected?

Record that pattern, the loading and any code for support. It is useful evidence, but it does not establish a specific failed part by itself.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Cycle ends before dishes are clean — checked 2026-10-22.
LG USA: Detergent remains in the dispenser — checked 2026-10-22.
LG USA: Using dishwasher detergent and additives — checked 2026-10-22.
Samsung US: Dishwasher error codes — checked 2026-10-22.
LG USA: Dishwasher owner manual MFL69261715 — checked 2026-10-22.

Related dishwasher codes and guides

Use the actual brand, wash system and complete display when choosing a code procedure.

Related codes & guides

Error code

Bosch dishwasher · E24

Bosch dishwasher E24 Error Code

Drain error — the drain hose is kinked or the filters are blocked.

Easy fix · 15–30 min
Error code

LG dishwasher · AE

LG dishwasher AE Error Code

Leakage has activated the dishwasher’s leak-detection system.

Call a pro
Error code

Samsung dishwasher · 4C

Samsung dishwasher 4C Error Code

The dishwasher is not receiving water at the required pressure or temperature.

Check model first
Error code

Samsung dishwasher · LC

Samsung dishwasher LC Error Code

The leak sensor detects moisture; WaterWall models also have a reflector-related exception.

Call a pro
Chart

Dishwashers

LG Dishwasher Error Codes

Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…

Chart

Dishwashers

Samsung Dishwasher Error Codes

Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…

Error code

LG dishwasher · FE

LG Dishwasher FE Error Code

Too much water is being detected; the named LG manual identifies an excess-water condition.

Call a pro
Error code

LG dishwasher · HE

LG Dishwasher HE Error Code

The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.

Call a pro
Error code

LG dishwasher · tE

LG Dishwasher tE Error Code

LG identifies a temperature-sensor error in its US dishwasher code guide.

Call a pro
Error code

LG dishwasher · LE

LG Dishwasher LE Error Code

The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.

Call a pro
Error code

LG dishwasher · nE

LG Dishwasher nE Error Code

The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.

Call a pro
Error code

LG dishwasher · bE

LG Dishwasher bE Error Code

LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.

Check model first
Error code

Samsung dishwasher · 1E

Samsung Dishwasher 1E Error Code

1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.

Check model first
Error code

Samsung dishwasher · 7E

Samsung Dishwasher 7E Error Code

On the covered WaterWall design, the reflector cannot move correctly.

Check model first
Error code

Samsung dishwasher · bE

Samsung Dishwasher bE Error Code

The control panel detects a stuck button; Samsung groups bE and 6E.

Check model first
Error code

Samsung dishwasher · HE

Samsung Dishwasher HE Error Code

Samsung labels HE a heater error and describes incorrect detection of the internal temperature.

Check model first
Error code

Samsung dishwasher · OC

Samsung Dishwasher OC Error Code

The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.

Call a pro
Error code

Samsung dishwasher · tE

Samsung Dishwasher tE Error Code

Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.

Check model first
Chart

Dishwashers

Dishwasher Error Codes by Brand

Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…

Chart

Dishwashers

Bosch Dishwasher Error Codes

Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…

Error code

LG dishwasher · PE

LG Dishwasher PE Error Code

According to LG, PE reports a water-level-sensor issue on certain older dishwashers.

Call a pro
Error code

LG dishwasher · F31

LG Dishwasher F31 Error Code

According to LG, F31 means the Heat Dry fan motor is not operating on a Dynamic Heat Dry model.

Call a pro
Error code

LG dishwasher · F35

LG Dishwasher F35 Error Code

According to LG, F35 means temperatures of Heat Dry components cannot be measured on applicable Dynamic Heat Dry models.

Call a pro
Error code

LG dishwasher · F37

LG Dishwasher F37 Error Code

According to LG, F37 reports that the Auto Open Door function is not working.

Call a pro
Error code

Samsung dishwasher · CE

Samsung Dishwasher CE Error Code

According to Samsung, CE means the dishwasher control panel cannot communicate with the rest of the appliance.

Check model first
Error code

Samsung dishwasher · HC

Samsung Dishwasher HC Error Code

According to Samsung, HC reports excessive temperature inside the dishwasher.

Check model first
Error code

Samsung dishwasher · PC

Samsung Dishwasher PC Error Code

According to Samsung, PC reports that the Zone Wash function is not operating correctly.

Check model first
Error code

Samsung dishwasher · PE

Samsung Dishwasher PE Error Code

According to Samsung, PE reports a problem with the dishwasher Half Load function.

Check model first