Find your code

LG Dishwasher CL: Control Lock and Model Buttons

LG dishwasher CL can indicate Control Lock rather than a fault. Use the model’s labeled release controls and keep panel locking separate from physical door problems.

By ApplianceCodeHQ Editorial Updated

In this guide
  1. Scope: the LG dishwasher CL setting
  2. Understand the current state
  3. Safe release checks
  4. When CL is only part of the problem
  5. Frequently asked questions

LG dishwasher CL indicates Control Lock in the US guide used here. The setting restricts changes at the control panel and can remain active after the dishwasher is turned off. Seeing CL after the next power-on therefore does not by itself prove an electrical failure. The first task is to locate the correct release controls for the model.

Scope: the LG dishwasher CL setting

Use this page when the exact LG US manual identifies CL as Control Lock. The general support article illustrates Half Load plus Energy Saver held together, but that example is not a promise that every panel has those buttons. Other appliances use similar letters for unrelated messages. This guide does not identify a physical door-latch fault from a control-lock indication.

Understand the current state

Control Lock is a setting; the door mechanism is a separate system
ObservationMeaning for the check
CL or the lock indicator with restricted options Find the model’s Control Lock release.
CL returns after power off/on The setting may persist; power cycling is not necessarily a release.
A damaged button or no response to the correct controls Contact support rather than pressing harder.
Door physically will not open or close Use the door-specific guidance and avoid force.

Safe release checks

  1. Save the panel state

    Photograph the indication and locate the complete dishwasher model.

  2. Find the labeled lock controls

    Use the manual’s Control Lock section. If the labels differ from an online illustration, follow the model rather than the illustration.

  3. Use the documented hold

    On the illustrated LG panel, Half Load and Energy Saver are held for at least three seconds. Apply that example only when your manual identifies the same combination.

  4. Recheck the original symptom

    After the lock indication clears, determine whether options now respond. Record any separate code or failure to start without relabeling it as CL.

When CL is only part of the problem

A dishwasher can have a known setting and a separate operating concern. For example, the setting might release correctly while the door remains obstructed or a distinct error appears. Keep those observations in order when contacting support. A precise report is more useful than saying that “nothing works,” and it avoids treating an internal service issue as a button combination problem.

Frequently asked questions

Why did switching off not clear CL?

LG describes a persistent Control Lock setting; an ordinary power cycle may leave it active.

Does CL mean the dishwasher needs a control board?

The setting alone does not establish a failed board.

Can I use the same buttons on an LG washer?

Only that washer’s manual can establish its controls. Appliance type and panel design matter.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
LG USA: Dishwasher drying-feature and control codes — checked 2026-10-22.

Related codes, guides and tools

Keep the model and complete display with every procedure.

Related codes & guides

Guide

Symptom guide

How to Reset a Bosch Dishwasher

Two different Bosch resets: cancel a running cycle with the Reset or Start button held about 4 seconds, or reset power…

Error code

Bosch dishwasher · E24

Bosch dishwasher E24 Error Code

Drain error — the drain hose is kinked or the filters are blocked.

Easy fix · 15–30 min
Error code

LG dishwasher · AE

LG dishwasher AE Error Code

Leakage has activated the dishwasher’s leak-detection system.

Call a pro
Error code

Samsung dishwasher · 4C

Samsung dishwasher 4C Error Code

The dishwasher is not receiving water at the required pressure or temperature.

Check model first
Error code

Samsung dishwasher · LC

Samsung dishwasher LC Error Code

The leak sensor detects moisture; WaterWall models also have a reflector-related exception.

Call a pro
Chart

Dishwashers

LG Dishwasher Error Codes

Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…

Chart

Dishwashers

Samsung Dishwasher Error Codes

Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…

Error code

LG dishwasher · FE

LG Dishwasher FE Error Code

Too much water is being detected; the named LG manual identifies an excess-water condition.

Call a pro
Error code

LG dishwasher · HE

LG Dishwasher HE Error Code

The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.

Call a pro
Error code

LG dishwasher · tE

LG Dishwasher tE Error Code

LG identifies a temperature-sensor error in its US dishwasher code guide.

Call a pro
Error code

LG dishwasher · LE

LG Dishwasher LE Error Code

The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.

Call a pro
Error code

LG dishwasher · nE

LG Dishwasher nE Error Code

The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.

Call a pro
Error code

LG dishwasher · bE

LG Dishwasher bE Error Code

LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.

Check model first
Error code

Samsung dishwasher · 1E

Samsung Dishwasher 1E Error Code

1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.

Check model first
Error code

Samsung dishwasher · 7E

Samsung Dishwasher 7E Error Code

On the covered WaterWall design, the reflector cannot move correctly.

Check model first
Error code

Samsung dishwasher · bE

Samsung Dishwasher bE Error Code

The control panel detects a stuck button; Samsung groups bE and 6E.

Check model first
Error code

Samsung dishwasher · HE

Samsung Dishwasher HE Error Code

Samsung labels HE a heater error and describes incorrect detection of the internal temperature.

Check model first
Error code

Samsung dishwasher · OC

Samsung Dishwasher OC Error Code

The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.

Call a pro
Error code

Samsung dishwasher · tE

Samsung Dishwasher tE Error Code

Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.

Check model first
Chart

Dishwashers

Dishwasher Error Codes by Brand

Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…

Chart

Dishwashers

Bosch Dishwasher Error Codes

Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…