Find your code

Bosch Dishwasher Error Codes

Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a filter clean and which go straight to Bosch service.

By ApplianceCodeHQ Editorial Updated

Bosch dishwasher codes fall into a few families: the heating assembly Bosch calls the heat pump (E09, E21), water coming in (E14, E17), water where it should not be (E15), the filter (E22), draining (E23, E24, E25) and the house power supply (E27). The family tells you who acts next. Some codes allow one power reset at the breaker, one is an owner filter clean, several go straight to Bosch Customer Support, and E27 goes to an electrician. Each code below has its own page with the Bosch meaning, safe checks and the service boundary.

Model and display scope

This reference follows Bosch’s US dishwasher code list. Newer panels show four-digit codes, and Bosch lists the matching descriptions side by side — for example E3000 with E14, E9240 with E22 and E9001 with E27. Look your code up exactly as displayed and do not shorten a longer code to the nearest familiar number. Some models show yet another format, such as E:92-40 in the SHP78CM5N manual, so keep the owner’s manual for your model, identified by the E-Nr on the rating plate, at hand.

Bosch dishwasher code reference

CodeMeaningDifficultyFix
E15 Water in the base — leak protection is on. Call a pro E15 page →
E24 Drain error — the drain hose is kinked or the filters are blocked. Easy fix · 15–30 min E24 page →
E25 Drain pump blocked, or the pump cover is loose. Moderate E25 page →

Who acts on which code

Bosch US owner actions by code family
CodesBosch owner actionNext if it persists
E09, E21 Breaker off for 30 seconds, then restart Bosch Customer Support
E27 Breaker reset Electrician checks the incoming voltage
E22 Remove and wash the filter Bosch support if it returns with a clean filter
E17 (E16) Check the inlet hose for kinks or damage Bosch support
E24, E25 Filter, hose, pump cover and disposal plug per the manual Bosch support
E14, E23 No owner fix listed Bosch support
E15 Turn off the water inflow Bosch support

Safe first observations

  1. Save the display and the model number

    Photograph the code and note the E-Nr from the rating plate. Record whether the code appeared after installation, filter maintenance or a garbage-disposal replacement.

  2. Take E15 out of the ordinary path

    Bosch directs shutting off water inflow and contacting support. Do not tilt the appliance or keep restarting it to empty the base.

  3. Use only the reset Bosch lists

    A breaker reset applies to codes such as E09, E21 and E27 — once. Cancelling a cycle is a different reset and does not clear a fault.

  4. Check only the owner areas

    For E22, E24 or E25, disconnect power before permitted filter or cover inspection, let hot water cool and protect against sharp debris. If the parts do not match the manual, stop.

How to reset a Bosch dishwasher

Cancel-and-drain versus the breaker reset, and when neither is the answer.

Read the guide

Read the E24 instructions carefully

Bosch’s E24 article names a blocked drain hose, filter condition and a new disposal’s knockout plug in its cause list, but its first numbered check still refers to the inlet hose (rechecked 2026-10-26). This reference keeps the drainage meaning without turning that wording into a universal hose procedure. The owner’s manual and an installer’s assessment should decide which connection needs attention. Reset instructions belong after the issue has been addressed, not before the original evidence is recorded.

Frequently asked questions

Can E15 be handled like an E24 drain warning?

No. E15 reports water in the base and active leakage protection. Bosch directs shutting off water inflow and contacting support.

Which Bosch codes can I clear with a reset?

Bosch lists a 30-second breaker reset first for codes such as E09, E21 and E27. If the code returns, the next step is service or, for E27, an electrician.

Does E25 prove the drain pump must be replaced?

No. The meaning includes blockage and a loose or missing cover. E23 is the code Bosch sends straight to support.

Why are some Bosch codes not on this page?

Each code needs its own Bosch source and page. Codes not linked here are not inferred from neighboring numbers; check Bosch’s list or your manual.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Bosch US: Dishwasher Error Codes — checked 2026-10-26.
Bosch US: E15 Dishwasher Error Code — checked 2026-10-22.
Bosch US: Dishwasher Error Code E24 — checked 2026-10-26.
Bosch US: E25 Dishwasher Error Code — checked 2026-10-22.
Bosch US: How to Reset the Dishwasher — checked 2026-10-26.

Related dishwasher references

Related codes & guides

Error code

Bosch dishwasher · E24

Bosch dishwasher E24 Error Code

Drain error — the drain hose is kinked or the filters are blocked.

Easy fix · 15–30 min
Error code

LG dishwasher · AE

LG dishwasher AE Error Code

Leakage has activated the dishwasher’s leak-detection system.

Call a pro
Error code

Samsung dishwasher · 4C

Samsung dishwasher 4C Error Code

The dishwasher is not receiving water at the required pressure or temperature.

Check model first
Error code

Samsung dishwasher · LC

Samsung dishwasher LC Error Code

The leak sensor detects moisture; WaterWall models also have a reflector-related exception.

Call a pro
Chart

Dishwashers

LG Dishwasher Error Codes

Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…

Chart

Dishwashers

Samsung Dishwasher Error Codes

Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…

Error code

LG dishwasher · FE

LG Dishwasher FE Error Code

Too much water is being detected; the named LG manual identifies an excess-water condition.

Call a pro
Error code

LG dishwasher · HE

LG Dishwasher HE Error Code

The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.

Call a pro
Error code

LG dishwasher · tE

LG Dishwasher tE Error Code

LG identifies a temperature-sensor error in its US dishwasher code guide.

Call a pro
Error code

LG dishwasher · LE

LG Dishwasher LE Error Code

The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.

Call a pro
Error code

LG dishwasher · nE

LG Dishwasher nE Error Code

The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.

Call a pro
Error code

LG dishwasher · bE

LG Dishwasher bE Error Code

LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.

Check model first
Error code

Samsung dishwasher · 1E

Samsung Dishwasher 1E Error Code

1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.

Check model first
Error code

Samsung dishwasher · 7E

Samsung Dishwasher 7E Error Code

On the covered WaterWall design, the reflector cannot move correctly.

Check model first
Error code

Samsung dishwasher · bE

Samsung Dishwasher bE Error Code

The control panel detects a stuck button; Samsung groups bE and 6E.

Check model first
Error code

Samsung dishwasher · HE

Samsung Dishwasher HE Error Code

Samsung labels HE a heater error and describes incorrect detection of the internal temperature.

Check model first
Error code

Samsung dishwasher · OC

Samsung Dishwasher OC Error Code

The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.

Call a pro
Error code

Samsung dishwasher · tE

Samsung Dishwasher tE Error Code

Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.

Check model first
Chart

Dishwashers

Dishwasher Error Codes by Brand

Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…

Error code

LG dishwasher · PE

LG Dishwasher PE Error Code

According to LG, PE reports a water-level-sensor issue on certain older dishwashers.

Call a pro
Error code

LG dishwasher · F31

LG Dishwasher F31 Error Code

According to LG, F31 means the Heat Dry fan motor is not operating on a Dynamic Heat Dry model.

Call a pro
Error code

LG dishwasher · F35

LG Dishwasher F35 Error Code

According to LG, F35 means temperatures of Heat Dry components cannot be measured on applicable Dynamic Heat Dry models.

Call a pro
Error code

LG dishwasher · F37

LG Dishwasher F37 Error Code

According to LG, F37 reports that the Auto Open Door function is not working.

Call a pro
Error code

Samsung dishwasher · CE

Samsung Dishwasher CE Error Code

According to Samsung, CE means the dishwasher control panel cannot communicate with the rest of the appliance.

Check model first
Error code

Samsung dishwasher · HC

Samsung Dishwasher HC Error Code

According to Samsung, HC reports excessive temperature inside the dishwasher.

Check model first
Error code

Samsung dishwasher · PC

Samsung Dishwasher PC Error Code

According to Samsung, PC reports that the Zone Wash function is not operating correctly.

Check model first
Error code

Samsung dishwasher · PE

Samsung Dishwasher PE Error Code

According to Samsung, PE reports a problem with the dishwasher Half Load function.

Check model first