Find your code

Samsung Dishwasher 3E Error Code

By ApplianceCodeHQ Editorial Updated

3E

What it means

The dishwasher reports that its incoming water is too hot.

Call a pro

Jump to the fix

Applies to these models and systems

This page uses Samsung US dishwasher support, which covers multiple designs rather than an exhaustive list of model numbers. Match your complete model and display to its US manual. Models without a digital display need their specific blinking-light interpretation. Samsung’s 3E entry checks whether the hot-water supply is set above 176°F. That upper error check is not a recommended operating target or a universal water-heater setting.

What 3E means

According to Samsung, 3E is a supply-temperature warning, while 3C is a different pump-operation entry. The letter matters. A displayed 3E is not permission to adjust electrical or gas water-heater controls, and feeling the water with a hand is not a safe way to verify the supply. Start with the dishwasher’s installation requirements and the household system information already available.

Documented conditions and next steps

Manufacturer guidance; no failure probabilities assigned
ConditionWhat it means for your next step
Supply setting above the cited upper check Have a qualified person assess the installation against the exact dishwasher and water-heater requirements.
Supply is not above that check but 3E persists Samsung directs this case to service. Do not keep lowering unrelated settings or changing wash programs.
Recently installed or reconnected appliance Tell the installer about the code and supply history. A new hookup is useful context, not proof of the cause.

Safe checks before a repair

  1. Record 3E accurately

    Keep a photograph and the complete model number. Distinguish the final E from C before using a procedure.

  2. Find the model’s supply requirements

    Read the US installation manual and any readily available household hot-water documentation. Do not open the heater’s electrical enclosure.

  3. Arrange safe verification when needed

    Use an installer or plumber if supply temperature, mixing equipment or the correct connection needs assessment. Avoid contact with potentially scalding water.

  4. Use Samsung service for an unresolved code

    If the supply has been verified appropriate and 3E remains, request diagnosis. Do not try repeated high-temperature cycles to see whether it clears.

Frequently asked questions

Should I set my water heater to 176°F?

No. The number is an upper check in this error entry, not a recommended setting. Follow the actual installation requirements.

Is 3E the same as 3C?

No. Samsung’s dishwasher list assigns 3E to hot supply water and 3C to pump operation.

Does 3E prove the dishwasher heater failed?

No. The entry concerns incoming water. Preserve the code and use the specified supply and service checks.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dishwasher error codes — checked 2026-10-22.
Samsung US: Dishwasher water supply requirements — checked 2026-10-22.

Samsung Dishwasher error codes

Keep the full model and complete display with the appliance type when choosing a procedure.

Open the reference

Related codes and next steps

Each reference has its own model and service limits.

Related codes & guides

Error code

Bosch dishwasher · E24

Bosch dishwasher E24 Error Code

Drain error — the drain hose is kinked or the filters are blocked.

Easy fix · 15–30 min
Error code

LG dishwasher · AE

LG dishwasher AE Error Code

Leakage has activated the dishwasher’s leak-detection system.

Call a pro
Error code

Samsung dishwasher · 4C

Samsung dishwasher 4C Error Code

The dishwasher is not receiving water at the required pressure or temperature.

Check model first
Error code

Samsung dishwasher · LC

Samsung dishwasher LC Error Code

The leak sensor detects moisture; WaterWall models also have a reflector-related exception.

Call a pro
Chart

Dishwashers

LG Dishwasher Error Codes

Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…

Chart

Dishwashers

Samsung Dishwasher Error Codes

Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…

Error code

LG dishwasher · FE

LG Dishwasher FE Error Code

Too much water is being detected; the named LG manual identifies an excess-water condition.

Call a pro
Error code

LG dishwasher · HE

LG Dishwasher HE Error Code

The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.

Call a pro
Error code

LG dishwasher · tE

LG Dishwasher tE Error Code

LG identifies a temperature-sensor error in its US dishwasher code guide.

Call a pro
Error code

LG dishwasher · LE

LG Dishwasher LE Error Code

The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.

Call a pro
Error code

LG dishwasher · nE

LG Dishwasher nE Error Code

The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.

Call a pro
Error code

LG dishwasher · bE

LG Dishwasher bE Error Code

LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.

Check model first
Error code

Samsung dishwasher · 1E

Samsung Dishwasher 1E Error Code

1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.

Check model first
Error code

Samsung dishwasher · 7E

Samsung Dishwasher 7E Error Code

On the covered WaterWall design, the reflector cannot move correctly.

Check model first
Error code

Samsung dishwasher · bE

Samsung Dishwasher bE Error Code

The control panel detects a stuck button; Samsung groups bE and 6E.

Check model first
Error code

Samsung dishwasher · HE

Samsung Dishwasher HE Error Code

Samsung labels HE a heater error and describes incorrect detection of the internal temperature.

Check model first
Error code

Samsung dishwasher · OC

Samsung Dishwasher OC Error Code

The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.

Call a pro
Error code

Samsung dishwasher · tE

Samsung Dishwasher tE Error Code

Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.

Check model first
Chart

Dishwashers

Dishwasher Error Codes by Brand

Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…

Chart

Dishwashers

Bosch Dishwasher Error Codes

Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…

Error code

LG dishwasher · PE

LG Dishwasher PE Error Code

According to LG, PE reports a water-level-sensor issue on certain older dishwashers.

Call a pro
Error code

LG dishwasher · F31

LG Dishwasher F31 Error Code

According to LG, F31 means the Heat Dry fan motor is not operating on a Dynamic Heat Dry model.

Call a pro
Error code

LG dishwasher · F35

LG Dishwasher F35 Error Code

According to LG, F35 means temperatures of Heat Dry components cannot be measured on applicable Dynamic Heat Dry models.

Call a pro
Error code

LG dishwasher · F37

LG Dishwasher F37 Error Code

According to LG, F37 reports that the Auto Open Door function is not working.

Call a pro
Error code

Samsung dishwasher · CE

Samsung Dishwasher CE Error Code

According to Samsung, CE means the dishwasher control panel cannot communicate with the rest of the appliance.

Check model first
Error code

Samsung dishwasher · HC

Samsung Dishwasher HC Error Code

According to Samsung, HC reports excessive temperature inside the dishwasher.

Check model first
Error code

Samsung dishwasher · PC

Samsung Dishwasher PC Error Code

According to Samsung, PC reports that the Zone Wash function is not operating correctly.

Check model first
Error code

Samsung dishwasher · PE

Samsung Dishwasher PE Error Code

According to Samsung, PE reports a problem with the dishwasher Half Load function.

Check model first

Other codes