Error code
Bosch dishwasher · E15
Bosch dishwasher E15 Error Code
Water in the base — leak protection is on.
Call a proSeparate a dark control panel from a powered dishwasher that will not begin a wash. Preserve codes, check normal door closure and leave wiring to professionals.
First identify what “will not start” means. A dark panel, a responsive panel with no wash, a door that will not close and a machine showing an error are different starting points. Note what happens when you use the normal Power and Start controls. Do not keep holding unfamiliar button combinations; those may change settings or erase useful error history.
This guide uses Samsung US power and door guidance, with links to LG and Samsung dishwasher code references. Control names, lock settings and cycle-start sequences vary. Read the exact owner manual for a lock indicator or selected delay, rather than borrowing a shortcut from a similar-looking panel. No step here authorizes opening a junction box, testing mains voltage or bypassing a latch.
| Starting condition | Safe direction |
|---|---|
| Panel stays dark | Check normal Power operation and an accessible household dishwasher switch, if fitted. |
| Panel works but door will not close | Look for projecting dishes and racks that are not fully seated; do not force the latch. |
| An error or unusual blinking pattern appears | Save it and use the matching brand/model interpretation before a reset. |
| Problem began at installation | Have the installer verify the required connections and fit. |
Photograph the code or blinking pattern. Note whether the panel responds, the door closes normally and the problem began after installation or an outage.
Samsung notes that wet or soapy hands can affect touch recognition. Clean a dirty control only as instructed, keeping liquid out of panel edges.
If the kitchen has a dedicated dishwasher switch, confirm its position. A repeatedly tripping breaker needs an electrician; do not keep resetting it or remove electrical covers.
Move projecting dishes and push racks fully into their intended positions. Stop if the door rubs the cabinet, the latch appears damaged or closing requires force.
Confirm the selected cycle and any visible lock or delay setting in the manual. Use only its instructions; a powered panel does not prove the start conditions have been met.
An installer should review a dishwasher that has never operated correctly after fitting, especially if door alignment or connections are in question. An electrician should assess a repeatedly tripping household circuit. Appliance service handles a persistent internal fault or damaged control after appropriate external checks. Tell each professional what you observed and which checks are complete so the visit starts with evidence.
No. Samsung explains that a reset can erase error history and does not correct a physical door or installation problem.
No. Do not bypass a door safety mechanism. A door that cannot close normally needs correction before use.
No. External power and installation conditions must be assessed without guessing at an internal part.
Stop resetting it and arrange an electrician’s assessment. A repeated trip is not a normal start procedure.
Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dishwasher will not turn on — checked 2026-10-22.
Samsung US: Dishwasher door does not close — checked 2026-10-22.
Samsung US: When to reset a dishwasher — checked 2026-10-22.
Samsung US: Dishwasher error codes — checked 2026-10-22.
Use the actual brand, wash system and complete display when choosing a code procedure.
Error code
Bosch dishwasher · E15
Water in the base — leak protection is on.
Call a pro
Error code
Bosch dishwasher · E24
Drain error — the drain hose is kinked or the filters are blocked.
Easy fix · 15–30 min
Error code
Bosch dishwasher · E25
Drain pump blocked, or the pump cover is loose.
Moderate
Error code
LG dishwasher · OE
The dishwasher is not draining correctly.
Check model first
Error code
LG dishwasher · IE
Not enough water is reaching the dishwasher.
Check model first
Error code
LG dishwasher · AE
Leakage has activated the dishwasher’s leak-detection system.
Call a pro
Error code
Samsung dishwasher · 4C
The dishwasher is not receiving water at the required pressure or temperature.
Check model first
Error code
Samsung dishwasher · 5C
The dishwasher cannot drain.
Check model first
Error code
Samsung dishwasher · LC
The leak sensor detects moisture; WaterWall models also have a reflector-related exception.
Call a proDishwashers
Find thirteen LG dishwasher code pages, including older-model PE and Dynamic Heat Dry F31/F35, with Auto Open Door F37…
Dishwashers
Browse sixteen Samsung dishwasher code pages with WaterWall limits, HC versus HE, CE communication, Zone Wash PC and…
Guide
Symptom guide
Use the drain code and model manual to check a dishwasher’s sink connection, visible hose and removable filter without…
Error code
LG dishwasher · FE
Too much water is being detected; the named LG manual identifies an excess-water condition.
Call a pro
Error code
LG dishwasher · HE
The dishwasher reports a heater-related fault; the listed model manual identifies the heater circuit.
Call a pro
Error code
LG dishwasher · tE
LG identifies a temperature-sensor error in its US dishwasher code guide.
Call a pro
Error code
LG dishwasher · LE
The dishwasher reports a cleaning-motor fault; the named manual identifies motor trouble.
Call a pro
Error code
LG dishwasher · nE
The dishwasher reports abnormal vario or impeller operation; the named manual identifies the vario motor.
Call a pro
Error code
LG dishwasher · bE
LG’s US guide identifies a bubble or excess-foam error associated with unsuitable detergent.
Check model first
Error code
Samsung dishwasher · 1E
1E/IE means restricted flow through the fine filter on WaterWall models, but excessive internal temperature on rotary models.
Check model first
Error code
Samsung dishwasher · 3C
Samsung identifies a pump-operation error.
Call a pro
Error code
Samsung dishwasher · 3E
The dishwasher reports that its incoming water is too hot.
Call a pro
Error code
Samsung dishwasher · 7E
On the covered WaterWall design, the reflector cannot move correctly.
Check model first
Error code
Samsung dishwasher · 9E
The dishwasher reports an insufficient water level.
Check model first
Error code
Samsung dishwasher · bE
The control panel detects a stuck button; Samsung groups bE and 6E.
Check model first
Error code
Samsung dishwasher · HE
Samsung labels HE a heater error and describes incorrect detection of the internal temperature.
Check model first
Error code
Samsung dishwasher · OC
The dishwasher detects more water than it should; Samsung groups OC, 0C and oE.
Call a pro
Error code
Samsung dishwasher · tE
Samsung identifies a temperature-sensor error: the internal temperature is being detected incorrectly.
Check model first
Guide
Symptom guide
Separate an interrupted wash from food residue, an unopened detergent cup or white film. Use safe loading and…
Guide
Symptom guide
Wet dishes do not identify a failed heater. Check whether the wash finished, which drying system your model uses and…
Guide
Symptom guide
Foam needs a product and model check. Stop adding chemicals, distinguish LG bE from Samsung’s button code and address…
Dishwashers
Compare covered LG, Samsung and Bosch dishwasher codes while keeping WaterWall exceptions, foam warnings and heater or…
Dishwashers
Every Bosch dishwasher code we cover, from E09 to E27: what each one means, which allow a breaker reset, which need a…
Error code
LG dishwasher · PE
According to LG, PE reports a water-level-sensor issue on certain older dishwashers.
Call a pro
Error code
LG dishwasher · F31
According to LG, F31 means the Heat Dry fan motor is not operating on a Dynamic Heat Dry model.
Call a pro
Error code
LG dishwasher · F35
According to LG, F35 means temperatures of Heat Dry components cannot be measured on applicable Dynamic Heat Dry models.
Call a pro
Error code
LG dishwasher · F37
According to LG, F37 reports that the Auto Open Door function is not working.
Call a pro
Error code
Samsung dishwasher · CE
According to Samsung, CE means the dishwasher control panel cannot communicate with the rest of the appliance.
Check model first
Error code
Samsung dishwasher · HC
According to Samsung, HC reports excessive temperature inside the dishwasher.
Check model first
Error code
Samsung dishwasher · PC
According to Samsung, PC reports that the Zone Wash function is not operating correctly.
Check model first
Error code
Samsung dishwasher · PE
According to Samsung, PE reports a problem with the dishwasher Half Load function.
Check model first
Guide
Symptom guide
Check automatic dishwasher opening only on equipped models. Separate Samsung AutoRelease settings and clearance from…
Guide
Symptom guide
LG dishwasher CL can indicate Control Lock rather than a fault. Use the model’s labeled release controls and keep…
Thank you! Your feedback helps us make this page better.
Could not send. Please try again.