Error code
LG washer · UE
LG washer UE Error Code
Unbalanced load — the drum can't spin evenly.
Easy fix · 10–20 minWhirlpool front-load LoC or LC can be a Control Lock setting. Use the labeled model controls and distinguish it from Samsung leakage codes or a locked door.
Whirlpool front-load LoC or LC can mean that Control Lock is enabled. In the cited US entry, it is a setting reminder rather than a component fault. This is a useful example of why brand and appliance type belong with every code: Samsung washer LC has a different water-level or leakage meaning. A borrowed reset can therefore send the owner in the wrong direction.
Use this guide for Whirlpool front-load washers whose US manual assigns LoC/LC to Control Lock. Some panels have a dedicated Control Lock label and others assign the function to another button. Follow the label and manual for the actual panel. The ability to pause or switch off a locked control panel does not mean every other setting will respond.
| Condition | What it establishes |
|---|---|
| LoC/LC with the matching Whirlpool manual | The control settings are locked. |
| Door remains physically locked | Use the door and cycle-state guidance; Control Lock alone does not explain every door condition. |
| A different F/E warning | Use that complete fault-code entry. |
| LC on a Samsung washer | Use Samsung’s own water-level/leakage guidance. |
Verify the manufacturer, front-load model and LoC/LC characters before choosing a procedure.
Use the owner’s manual when the panel does not have a dedicated button. Do not guess a combination from another model.
On the panel described in Whirlpool’s LoC/LC page, touch and hold Control Lock for three seconds. The source describes a three-to-one countdown for activation.
Confirm that the lock indication changes as the model describes. If the controls remain unresponsive, record that separately instead of repeatedly forcing the button.
If a correct control release removes LoC but the cycle still will not start, keep those two observations separate. Check the actual door message, cycle state and start procedure in the manual. A damaged button is not fixed by holding it harder. A physical door that stays locked after the normal safe release conditions needs a different assessment from a panel that refuses option changes.
In this front-load entry it means Control Lock. That must not be transferred to Samsung LC.
No. The physical interlock also depends on the model and cycle conditions.
The described panel uses a timed hold to operate Control Lock. Use the matching manual rather than assuming every console behaves identically.
Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Whirlpool US: LoC or LC — Front Load Washer — checked 2026-10-22.
Whirlpool US Product Help: Front-load washer error codes — checked 2026-10-22.
Keep the model and complete display with every procedure.
Error code
LG washer · UE
Unbalanced load — the drum can't spin evenly.
Easy fix · 10–20 min
Error code
Error code
LG washer · IE
Water inlet error — the tub isn't filling.
Easy fix · 10–20 min
Error code
Samsung washer · LC
Water level or leak error — water is detected where it doesn't belong.
ModerateWashers
Browse eighteen LG washer code pages, including distinct Ed1/Ed2 detergent warnings and ezDispense Ed5, with model…
Guide
Symptom guide
Water remains in the washer? Match the drain code and model before inspecting a hose or using an owner-accessible filter…
Washers
One chart for the common washer problems — drain, fill, unbalanced load, door, leak — and the code LG, Samsung and…
Error code
LG washer · dE
The door has not closed or locked as required.
Check model first
Error code
LG washer · LE
The tub cannot spin; LG identifies overload or an object in the tub as possible reasons.
Check model first
Error code
Error code
LG washer · tE
Heating error; LG associates it with the thermistor that senses temperature.
Call a pro
Error code
Error code
Samsung washer · 4C
Water is not entering the washer correctly.
Check model first
Error code
Samsung washer · 5C
Water is draining too slowly or is not draining.
Check model first
Error code
Samsung washer · dC
Model-dependent: a door error or an unbalanced-load error.
Check model first
Error code
Samsung washer · Ub
An unbalanced load prevented the cycle from completing.
Check model first
Error code
Whirlpool washer · F8 E1
The washer senses insufficient incoming water flow.
Check model first
Error code
Whirlpool washer · F9 E1
The drain operation is taking longer than expected.
Check model first
Error code
Whirlpool washer · F5 E2
The door is not locking correctly.
Check model firstWashers
Browse fourteen Samsung washer code pages with AC communication, 3C motor and tC sensing, model-dependent 3E meanings…
Washers
Compare thirteen Whirlpool front-load code pages for water, doors, balance, foam and dispenser messages, with exact…
Guide
Symptom guide
Separate a drain problem, an unbalanced load and a door warning before treating a washer that will not spin as a…
Error code
LG washer · Sud
The washer has detected too much foam and is managing an oversudsing condition.
Check model first
Error code
LG washer · PF
Power was interrupted during operation; the display does not identify why the supply was lost.
Check model first
Error code
LG washer · CE
An overcurrent condition has been detected in the motor’s electrical circuit.
Call a pro
Error code
Samsung washer · OC
The washer reports an overflow condition: too much water is detected.
Call a pro
Error code
Samsung washer · 4C2
The cold-water supply is unexpectedly hot; Samsung identifies reversed hot and cold connections.
Check model first
Error code
Samsung washer · SUd
Excessive suds were detected; the washer pauses to let the foam settle before continuing.
Check model first
Error code
Whirlpool washer · F5 E1
Whirlpool identifies this front-load entry as a door-switch condition.
Check model first
Error code
Whirlpool washer · F5 E3
The cited Whirlpool front-load guidance says the door is not locking properly.
Check model first
Error code
Whirlpool washer · F7 E1
A motor-speed sensing error: the selected cycle speed is not being achieved.
Check model first
Error code
Whirlpool washer · Sud / Sd
Excess suds are interfering with the wash or spin, so the washer adds rinsing and pauses.
Check model first
Guide
Symptom guide
Compare LG Sud, Samsung SUd and Whirlpool Sud/Sd without assuming the same pause, cleaning cycle or dispenser…
Guide
Symptom guide
A locked front-load door may be protecting against water, heat or drum movement. Preserve the code and use the exact…
Error code
LG washer · dHE
LG identifies a dry-function error on applicable washer-dryer equipment.
Check model first
Error code
LG washer · AE
The covered LG front-load entry reports internal leakage and activation of the leak-protection system.
Call a pro
Error code
LG washer · SE
LG’s front-load support describes SE as a sensor error requiring service if the limited restart does not resolve it.
Call a pro
Error code
Whirlpool washer · F0 E1
A load is detected while the Clean Washer maintenance cycle is selected; Whirlpool also lists rL for this condition.
Check model first
Error code
Whirlpool washer · F0 E5
The covered front-load washer reports an off-balance load, which can extend the cycle or reduce spin speed.
Check model first
Error code
Whirlpool washer · F8 E2
Whirlpool identifies a problem with the front-load washer’s dispenser system.
Check model first
Error code
Whirlpool washer · F8 E3
The washer reports an overflow condition involving too much water or foam.
Call a pro
Error code
Whirlpool washer · dET
The detergent dispenser cartridge is not detected on applicable cartridge-equipped front-load washers.
Check model first
Error code
Whirlpool washer · Int
The cycle was paused or canceled; Int can remain while the washer stops spinning and drains.
Check model first
Guide
Symptom guide
Separate normal load sensing from a washer that will not fill. Compare LG, Samsung and Whirlpool supply codes, safe…
Guide
Symptom guide
Samsung washer CL or locked buttons can indicate Child Lock. Use the model’s labeled controls, distinguish a door…
Guide
Symptom guide
Use LG Tub Clean, Samsung Self Clean or Whirlpool Clean Washer with an empty drum, the correct model instructions and…
Error code
LG washer · HE
According to LG, HE reports a heater error on the front-load models covered by its US guide.
Check model first
Error code
LG washer · vS
According to LG, vS concerns the vibration sensor; the display can resemble u5 or uS.
Check model first
Error code
Samsung washer · bE2
Samsung places bE2 in its stuck-button group, but BE2/8E2 means a MEMS sensor error on some models.
Check model first
Error code
Samsung washer · 9C1
According to Samsung, 9C1 belongs to the washer electrical-supply irregularity group.
Call a pro
Error code
Samsung washer · ddC
According to Samsung, ddC or dC3 means the Add Door is not detected as closed and locked.
Check model first
Guide
Symptom guide
Clear Samsung auto-dispenser refill messages at the correct wash or rinse stage. Check liquid compartments, drawer…
Guide
Symptom guide
Use Samsung washer calibration with an empty tub and model-specific controls. Cb/C6 is a calibration status, while…
Guide
Symptom guide
Samsung washer dn means an update is downloading. Keep power on, record elapsed time and use the washer-specific support…
Guide
Symptom guide
Check Whirlpool Load & Go by washer design, liquid type and dosing mode. Keep top-load controls separate from front-load…
Error code
LG washer · Ed1 / Ed2
LG identifies Ed1 and Ed2 as detergent-dispensing warnings, with different pump conditions reported.
Check model first
Error code
LG washer · Ed5
LG identifies Ed5 as a communication problem involving the automatic detergent dispenser and its control system.
Check model first
Error code
Samsung washer · AC
Samsung lists AC as a washer communication error; the exact model determines the affected system.
Check model first
Error code
Samsung washer · 3C
Samsung identifies washer 3C as a motor error. It does not by itself identify a failed motor or sensor.
Check model first
Error code
Samsung washer · tC
Samsung lists washer tC, tE and tE1 in its temperature-sensor error group.
Check model first
Guide
Symptom guide
Clean an LG ezDispense drawer using the matching model instructions. Distinguish OPn closure, dcL nozzle cleaning and…
Guide
Symptom guide
Read Samsung washer blinking lights with the exact panel and model. Separate fault patterns from Self Clean reminders…
Thank you! Your feedback helps us make this page better.
Could not send. Please try again.