Find your code

Washer Not Filling: Water Supply and Safe Checks

Separate normal load sensing from a washer that will not fill. Compare LG, Samsung and Whirlpool supply codes, safe observations and service boundaries.

By ApplianceCodeHQ Editorial Updated

Washer Not Filling: Water Supply and Safe Checks
In this guide
  1. Model scope and water-level expectations
  2. Choose the correct path
  3. Safe owner observations
  4. Information that helps the installer
  5. Frequently asked questions

A washer that does not fill immediately may be sensing the load, while a washer that never receives water needs a different response. Record whether the drum moves, whether any water enters and whether the panel shows a complete code. Continuous filling is a third condition: stop and address overflow instead of applying a no-water checklist. Adding water by hand does not establish why the machine failed to fill.

Model scope and water-level expectations

This guide connects the covered LG and Samsung US washer supply references and Whirlpool US front-load F8 E1. Their hose requirements and controls are not interchangeable. Samsung explains that applicable washers sense the load before filling and use less visible water than older designs. Do not judge an efficient washer solely by whether laundry is submerged. If clothes remain nearly dry or a fill warning appears, use the exact model procedure.

Choose the correct path

Fill delay, insufficient supply and overflow are separate conditions
ConditionFirst response
Samsung weight sensing before fill Allow the documented sensing stage if operation is normal and safely contained.
LG IE, Samsung 4C or Whirlpool F8 E1 Open the complete brand-specific supply-code page.
Samsung 4C2 or a hot/cold connection warning Have the installation checked against the model’s connection requirements.
Water keeps entering or escapes Stop use and close accessible supply valves safely; request help.

Safe owner observations

  1. Check the household supply

    Note a known water outage and whether normal household taps have water. Do not run disconnected washer hoses into a bucket as a pressure test.

  2. Observe accessible valves and hoses

    Confirm the intended supply is available and look for visible kinks or damage. Do not force a stuck valve, move a stacked unit or detach a pressurized connection.

  3. Review both supply connections

    Some Samsung settings can use hot and cold supplies even when a user expects only cold. Ask the installer to match each connection to the model’s labels.

  4. Review drain installation from normal access

    An incorrectly installed drain can affect filling. Compare the visible setup with the exact manual; do not substitute another brand’s standpipe dimensions.

  5. Follow the actual code after corrections

    Use only that code’s documented recovery. If supply observations are normal but filling still fails, request service.

Information that helps the installer

Report recent installation or plumbing work, the full code, which cycle was selected and whether the issue affects every load. A hose visible from the cabinet opening can be photographed without dismantling anything. If the supply is unavailable throughout the home, the utility or plumber is the useful contact; replacing a washer part will not restore a household water outage.

Frequently asked questions

Should clothes always be covered by water?

No. Water use depends on the model and cycle. Use the manufacturer’s expectations rather than an older washer’s visible level.

Can cold settings still need a hot connection?

On some Samsung settings, yes. The manufacturer describes automatic temperature control; confirm the exact model.

Should I add water manually?

No. That bypasses the intended fill behavior and does not diagnose the problem.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
LG USA: Front Load Washer — Error Code List — checked 2026-10-22.
Samsung US: Water fill issues with washing machines — checked 2026-10-22.
Whirlpool US Product Help: Front-load washer error codes — checked 2026-10-22.

Related codes, guides and tools

Use the actual model and full display before choosing a procedure.

Related codes & guides

Error code

LG washer · UE

LG washer UE Error Code

Unbalanced load — the drum can't spin evenly.

Easy fix · 10–20 min
Error code

LG washer · OE

LG washer OE Error Code

Drain error — water isn't draining.

Easy fix · 20–30 min
Error code

LG washer · IE

LG washer IE Error Code

Water inlet error — the tub isn't filling.

Easy fix · 10–20 min
Error code

Samsung washer · LC

Samsung washer LC Error Code

Water level or leak error — water is detected where it doesn't belong.

Moderate
Chart

Washers

LG Washer Error Codes

Browse eighteen LG washer code pages, including distinct Ed1/Ed2 detergent warnings and ezDispense Ed5, with model…

Chart

Washers

Washer Error Codes by Brand

One chart for the common washer problems — drain, fill, unbalanced load, door, leak — and the code LG, Samsung and…

Error code

LG washer · dE

LG washer dE Error Code

The door has not closed or locked as required.

Check model first
Error code

LG washer · LE

LG washer LE Error Code

The tub cannot spin; LG identifies overload or an object in the tub as possible reasons.

Check model first
Error code

LG washer · PE

LG washer PE Error Code

LG reports a problem with the water-level sensor.

Call a pro
Error code

LG washer · tE

LG washer tE Error Code

Heating error; LG associates it with the thermistor that senses temperature.

Call a pro
Error code

Samsung washer · dC

Samsung washer dC Error Code

Model-dependent: a door error or an unbalanced-load error.

Check model first
Error code

Samsung washer · Ub

Samsung washer Ub Error Code

An unbalanced load prevented the cycle from completing.

Check model first
Chart

Washers

Samsung Washer Error Codes

Browse fourteen Samsung washer code pages with AC communication, 3C motor and tC sensing, model-dependent 3E meanings…

Chart

Washers

Whirlpool Washer Error Codes

Compare thirteen Whirlpool front-load code pages for water, doors, balance, foam and dispenser messages, with exact…

Error code

LG washer · Sud

LG Washer Sud Error Code

The washer has detected too much foam and is managing an oversudsing condition.

Check model first
Error code

LG washer · PF

LG Washer PF Error Code

Power was interrupted during operation; the display does not identify why the supply was lost.

Check model first
Error code

LG washer · CE

LG Washer CE Error Code

An overcurrent condition has been detected in the motor’s electrical circuit.

Call a pro
Error code

Samsung washer · OC

Samsung Washer OC Error Code

The washer reports an overflow condition: too much water is detected.

Call a pro
Error code

Samsung washer · 4C2

Samsung Washer 4C2 Error Code

The cold-water supply is unexpectedly hot; Samsung identifies reversed hot and cold connections.

Check model first
Error code

Samsung washer · SUd

Samsung Washer SUd Error Code

Excessive suds were detected; the washer pauses to let the foam settle before continuing.

Check model first
Error code

Whirlpool washer · F5 E1

Whirlpool Washer F5 E1 Error Code

Whirlpool identifies this front-load entry as a door-switch condition.

Check model first
Error code

Whirlpool washer · F5 E3

Whirlpool Washer F5 E3 Error Code

The cited Whirlpool front-load guidance says the door is not locking properly.

Check model first
Error code

Whirlpool washer · F7 E1

Whirlpool Washer F7 E1 Error Code

A motor-speed sensing error: the selected cycle speed is not being achieved.

Check model first
Error code

Whirlpool washer · Sud / Sd

Whirlpool Washer Sud / Sd Error Code

Excess suds are interfering with the wash or spin, so the washer adds rinsing and pauses.

Check model first
Error code

LG washer · dHE

LG Washer dHE Error Code

LG identifies a dry-function error on applicable washer-dryer equipment.

Check model first
Error code

LG washer · AE

LG Washer AE Error Code

The covered LG front-load entry reports internal leakage and activation of the leak-protection system.

Call a pro
Error code

LG washer · SE

LG Washer SE Error Code

LG’s front-load support describes SE as a sensor error requiring service if the limited restart does not resolve it.

Call a pro
Error code

Whirlpool washer · F0 E1

Whirlpool Washer F0 E1 Error Code

A load is detected while the Clean Washer maintenance cycle is selected; Whirlpool also lists rL for this condition.

Check model first
Error code

Whirlpool washer · F0 E5

Whirlpool Washer F0 E5 Error Code

The covered front-load washer reports an off-balance load, which can extend the cycle or reduce spin speed.

Check model first
Error code

Whirlpool washer · F8 E2

Whirlpool Washer F8 E2 Error Code

Whirlpool identifies a problem with the front-load washer’s dispenser system.

Check model first
Error code

Whirlpool washer · F8 E3

Whirlpool Washer F8 E3 Error Code

The washer reports an overflow condition involving too much water or foam.

Call a pro
Error code

Whirlpool washer · dET

Whirlpool Washer dET Error Code

The detergent dispenser cartridge is not detected on applicable cartridge-equipped front-load washers.

Check model first
Error code

LG washer · HE

LG Washer HE Error Code

According to LG, HE reports a heater error on the front-load models covered by its US guide.

Check model first
Error code

LG washer · vS

LG Washer vS Error Code

According to LG, vS concerns the vibration sensor; the display can resemble u5 or uS.

Check model first
Error code

Samsung washer · bE2

Samsung Washer bE2 Error Code

Samsung places bE2 in its stuck-button group, but BE2/8E2 means a MEMS sensor error on some models.

Check model first
Error code

Samsung washer · 9C1

Samsung Washer 9C1 Error Code

According to Samsung, 9C1 belongs to the washer electrical-supply irregularity group.

Call a pro
Error code

Samsung washer · ddC

Samsung Washer ddC Error Code

According to Samsung, ddC or dC3 means the Add Door is not detected as closed and locked.

Check model first
Error code

LG washer · Ed1 / Ed2

LG Washer Ed1 / Ed2 Error Code

LG identifies Ed1 and Ed2 as detergent-dispensing warnings, with different pump conditions reported.

Check model first
Error code

LG washer · Ed5

LG Washer Ed5 Error Code

LG identifies Ed5 as a communication problem involving the automatic detergent dispenser and its control system.

Check model first
Error code

Samsung washer · AC

Samsung Washer AC Error Code

Samsung lists AC as a washer communication error; the exact model determines the affected system.

Check model first
Error code

Samsung washer · 3C

Samsung Washer 3C Error Code

Samsung identifies washer 3C as a motor error. It does not by itself identify a failed motor or sensor.

Check model first
Error code

Samsung washer · tC

Samsung Washer tC Error Code

Samsung lists washer tC, tE and tE1 in its temperature-sensor error group.

Check model first