Find your code

Washer Error Codes by Brand

By ApplianceCodeHQ Editorial Updated

OE · 5C · F9 E1

Drain error

The drain error on LG, Samsung and Whirlpool front-load washers

Every brand has its own code for the same few problems. The chart below lines them up so you can find the meaning even if your washer is not the brand you are used to. A dash means the brand uses a different scheme for that problem or we have not confirmed its code yet. Some Samsung models show E in place of C — 4E instead of 4C, 5E instead of 5C. Samsung also notes that on some models dC is an unbalanced-load error, not a door error.

Common washer error codes by brand
ProblemLGSamsungWhirlpool front-load
Water not draining OE 5C (5E) F9 E1
Tub not filling IE 4C (4E) F8 E1
Unbalanced load UE Ub (UE) —
Door not closed or locked; Samsung dC varies by model dE dC (dE) F5 E2
Water level or leak detected — LC (LE) —
Tub fails to spin (overload) LE — —

What to check first

  1. Drain codes

    Drain pump filter, drain hose kinks, the house drain.

  2. Fill codes

    Faucets fully open, inlet hoses not kinked, inlet screens clean, water pressure.

  3. Unbalanced load

    Spread the laundry evenly, fix the load size, level the washer.

  4. Door codes

    Close the door firmly; make sure no laundry is caught in it.

  5. Leak codes

    Unplug the washer, look for water and check the hoses before running it again.

Sources: According to the manufacturer. These references are manufacturer guidance, not an independent diagnosis.
LG USA: Front Load Washer — Error Code List — checked 2026-10-22.
Samsung US: Washing machine information and error codes — checked 2026-10-22.
Whirlpool US Product Help: Front-load washer error codes — checked 2026-10-22.

Washer won't drain

Model-specific filter limits, visible hose checks and the service boundary.

Read the guide
Can I use this chart instead of the model manual?

No. It compares documented code groups, not interchangeable repair procedures. Samsung dC and model-specific controls require the manual.

Why does the Whirlpool column say front-load?

The cited source covers that washer type. This chart does not extend its meanings to top loaders or dishwashers.

Brand references

Additional code distinctions

LG washer CE concerns motor-circuit overcurrent, while Samsung includes CE in the 4C2 hot/cold supply group. Samsung washer OE belongs to overflow, while LG washer OE concerns drainage. The full brand, appliance and model determine the meaning; matching letters are not a repair procedure.

Power, foam and overflow references

Dispenser and maintenance messages

Whirlpool front-load F8 E2 concerns the dispenser, F8 E3 reports excess water or foam, and dET concerns cartridge detection with a documented single-load dosing exception. F0 E1/rL belongs to a load detected during Clean Washer, while Int can remain during a canceled cycle’s spin-down and drainage. These are separate conditions, not extra aliases for low fill.

Dispenser, maintenance and sensing coverage

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Whirlpool US: F8 E2 — Front Load Washer — checked 2026-10-22.
Whirlpool US: F8 E3 — Front Load Washer — checked 2026-10-22.
Whirlpool US: F0 E1 or rL — Front Load Washer — checked 2026-10-22.
Whirlpool US: dET — Front Load Washer — checked 2026-10-22.
Whirlpool US: Int — Error Code — checked 2026-10-22.
LG USA: Front Load Washer — Error Code List — checked 2026-10-22.

Check lookalikes and operating states before a reset

Brand, appliance type and the complete model determine whether a display is a fault or a setting. Preserve every character and any feature restriction. The cross-appliance reference shows documented differences; the status guide covers locks, setup and updates with their separate completion conditions.

Code identity and status references

Related display and dispenser guidance

Match the complete display and model before choosing the next step.

Related codes & guides

Calculator

Tool

Repair vs Replace Calculator

Enter the appliance age, its expected lifespan, the repair quote and the price of a new unit to see whether the fix is…

Error code

LG washer · UE

LG washer UE Error Code

Unbalanced load — the drum can't spin evenly.

Easy fix · 10–20 min
Error code

LG washer · OE

LG washer OE Error Code

Drain error — water isn't draining.

Easy fix · 20–30 min
Error code

LG washer · IE

LG washer IE Error Code

Water inlet error — the tub isn't filling.

Easy fix · 10–20 min
Error code

Samsung washer · LC

Samsung washer LC Error Code

Water level or leak error — water is detected where it doesn't belong.

Moderate
Chart

Washers

LG Washer Error Codes

Browse eighteen LG washer code pages, including distinct Ed1/Ed2 detergent warnings and ezDispense Ed5, with model…

Error code

LG washer · dE

LG washer dE Error Code

The door has not closed or locked as required.

Check model first
Error code

LG washer · LE

LG washer LE Error Code

The tub cannot spin; LG identifies overload or an object in the tub as possible reasons.

Check model first
Error code

LG washer · PE

LG washer PE Error Code

LG reports a problem with the water-level sensor.

Call a pro
Error code

LG washer · tE

LG washer tE Error Code

Heating error; LG associates it with the thermistor that senses temperature.

Call a pro
Error code

Samsung washer · dC

Samsung washer dC Error Code

Model-dependent: a door error or an unbalanced-load error.

Check model first
Error code

Samsung washer · Ub

Samsung washer Ub Error Code

An unbalanced load prevented the cycle from completing.

Check model first
Chart

Washers

Samsung Washer Error Codes

Browse fourteen Samsung washer code pages with AC communication, 3C motor and tC sensing, model-dependent 3E meanings…

Chart

Washers

Whirlpool Washer Error Codes

Compare thirteen Whirlpool front-load code pages for water, doors, balance, foam and dispenser messages, with exact…

Error code

LG washer · Sud

LG Washer Sud Error Code

The washer has detected too much foam and is managing an oversudsing condition.

Check model first
Error code

LG washer · PF

LG Washer PF Error Code

Power was interrupted during operation; the display does not identify why the supply was lost.

Check model first
Error code

LG washer · CE

LG Washer CE Error Code

An overcurrent condition has been detected in the motor’s electrical circuit.

Call a pro
Error code

Samsung washer · OC

Samsung Washer OC Error Code

The washer reports an overflow condition: too much water is detected.

Call a pro
Error code

Samsung washer · 4C2

Samsung Washer 4C2 Error Code

The cold-water supply is unexpectedly hot; Samsung identifies reversed hot and cold connections.

Check model first
Error code

Samsung washer · SUd

Samsung Washer SUd Error Code

Excessive suds were detected; the washer pauses to let the foam settle before continuing.

Check model first
Error code

Whirlpool washer · F5 E1

Whirlpool Washer F5 E1 Error Code

Whirlpool identifies this front-load entry as a door-switch condition.

Check model first
Error code

Whirlpool washer · F5 E3

Whirlpool Washer F5 E3 Error Code

The cited Whirlpool front-load guidance says the door is not locking properly.

Check model first
Error code

Whirlpool washer · F7 E1

Whirlpool Washer F7 E1 Error Code

A motor-speed sensing error: the selected cycle speed is not being achieved.

Check model first
Error code

Whirlpool washer · Sud / Sd

Whirlpool Washer Sud / Sd Error Code

Excess suds are interfering with the wash or spin, so the washer adds rinsing and pauses.

Check model first
Error code

LG washer · dHE

LG Washer dHE Error Code

LG identifies a dry-function error on applicable washer-dryer equipment.

Check model first
Error code

LG washer · AE

LG Washer AE Error Code

The covered LG front-load entry reports internal leakage and activation of the leak-protection system.

Call a pro
Error code

LG washer · SE

LG Washer SE Error Code

LG’s front-load support describes SE as a sensor error requiring service if the limited restart does not resolve it.

Call a pro
Error code

Whirlpool washer · F0 E1

Whirlpool Washer F0 E1 Error Code

A load is detected while the Clean Washer maintenance cycle is selected; Whirlpool also lists rL for this condition.

Check model first
Error code

Whirlpool washer · F0 E5

Whirlpool Washer F0 E5 Error Code

The covered front-load washer reports an off-balance load, which can extend the cycle or reduce spin speed.

Check model first
Error code

Whirlpool washer · F8 E2

Whirlpool Washer F8 E2 Error Code

Whirlpool identifies a problem with the front-load washer’s dispenser system.

Check model first
Error code

Whirlpool washer · F8 E3

Whirlpool Washer F8 E3 Error Code

The washer reports an overflow condition involving too much water or foam.

Call a pro
Error code

Whirlpool washer · dET

Whirlpool Washer dET Error Code

The detergent dispenser cartridge is not detected on applicable cartridge-equipped front-load washers.

Check model first
Error code

LG washer · HE

LG Washer HE Error Code

According to LG, HE reports a heater error on the front-load models covered by its US guide.

Check model first
Error code

LG washer · vS

LG Washer vS Error Code

According to LG, vS concerns the vibration sensor; the display can resemble u5 or uS.

Check model first
Error code

Samsung washer · bE2

Samsung Washer bE2 Error Code

Samsung places bE2 in its stuck-button group, but BE2/8E2 means a MEMS sensor error on some models.

Check model first
Error code

Samsung washer · 9C1

Samsung Washer 9C1 Error Code

According to Samsung, 9C1 belongs to the washer electrical-supply irregularity group.

Call a pro
Error code

Samsung washer · ddC

Samsung Washer ddC Error Code

According to Samsung, ddC or dC3 means the Add Door is not detected as closed and locked.

Check model first
Error code

LG washer · Ed1 / Ed2

LG Washer Ed1 / Ed2 Error Code

LG identifies Ed1 and Ed2 as detergent-dispensing warnings, with different pump conditions reported.

Check model first
Error code

LG washer · Ed5

LG Washer Ed5 Error Code

LG identifies Ed5 as a communication problem involving the automatic detergent dispenser and its control system.

Check model first
Error code

Samsung washer · AC

Samsung Washer AC Error Code

Samsung lists AC as a washer communication error; the exact model determines the affected system.

Check model first
Error code

Samsung washer · 3C

Samsung Washer 3C Error Code

Samsung identifies washer 3C as a motor error. It does not by itself identify a failed motor or sensor.

Check model first
Error code

Samsung washer · tC

Samsung Washer tC Error Code

Samsung lists washer tC, tE and tE1 in its temperature-sensor error group.

Check model first