Find your code

Washer Won’t Spin: What to Check First

Separate a drain problem, an unbalanced load and a door warning before treating a washer that will not spin as a failed motor.

By ApplianceCodeHQ Editorial Updated

Washer Won’t Spin: What to Check First
In this guide
  1. Which washers this guide covers
  2. Match the observation to the next page
  3. Follow the symptom without bypassing protection
  4. What to record before calling
Read the code first

Short answer

Water left in the tub, a stopped unbalanced load and a door error need different checks. Do not select a replacement motor from the symptom alone.

Which washers this guide covers

This guide uses LG front-load and Samsung US washer support. It is an owner triage guide, not a universal repair sequence. Samsung front-load pump-filter instructions do not apply to its top loaders. Calibration is model-dependent. For Whirlpool, use the linked front-load references and the exact model manual rather than copying Samsung controls.

Match the observation to the next page

A code selects a check; it does not diagnose a replacement part
Observation or displayMeaning in the cited guidanceStart here
Water remains; Samsung 5C Draining must complete before spinning Drain hose and the approved front-load filter procedure
Samsung Ub or LG UE Load balance problem Pause and redistribute laundry
LG LE Tub failed to spin; overload or an obstruction is possible LG LE page; do not force rotation
LG dE or Samsung door-code model Closure or locking needs attention Clear visible trapped fabric after a normal unlock
Samsung dC with no confirmed model meaning Door or imbalance, depending on model Read the model’s code table before choosing a branch

Follow the symptom without bypassing protection

  1. Keep the model and exact display

    Photograph the code and note whether the machine still contains water. Include a suffix or a second code segment in your notes.

  2. Address a drain fault first

    If the display reports draining, use that code page. Do not open a full hot filter to make the machine spin. A household drain that backs up belongs with a plumber.

  3. Pause before redistributing laundry

    For a confirmed balance error, wait for the tub to stop and the door or lid to release. Untangle and redistribute the load within the manual’s loading guidance, then resume.

  4. Check the door only after release

    With power off, move fabric out of the opening and inspect for visible damage. Do not bridge a latch or lid switch.

  5. Use calibration only when documented

    Samsung’s spin guide includes calibration, but says models without it in their manual do not have the feature. Do not borrow an internet button combination for a different washer.

What to record before calling

Write down the load type, cycle, whether water drained and whether the washer ever began rotating. Say whether it was recently installed or moved. A report that the fault remains after a normal load was redistributed is more useful than a claim that the bearings or motor must be bad. Keep a list of the checks you actually completed; do not include tests you were unable to perform.

Can a washer fail to spin because it cannot drain?

Yes. Samsung’s guide explains that the drain step comes first. Address a displayed drain error before assuming a motor problem.

Should I add more clothes every time it stops?

No. First confirm a balance error and follow the manual’s loading instructions. A door, drain or LE fault needs its own response.

Does dC always mean imbalance?

No. Samsung uses dC for a door error on some models. The model manual chooses the branch.

Sources: According to the manufacturer. These references are manufacturer guidance, not an independent diagnosis.
LG USA: Front Load Washer — Error Code List — checked 2026-10-22.
LG USA: dE, dE1 and dE2 on front-load washers — checked 2026-10-22.
Samsung US: Washing machine information and error codes — checked 2026-10-22.
Samsung US: Washing machine does not spin at all — checked 2026-10-22.
Samsung US: Washing machine will not drain — checked 2026-10-22.

Choose the code or drain guide

Related display and dispenser guidance

Match the complete display and model before choosing the next step.

Related codes & guides

Error code

LG washer · UE

LG washer UE Error Code

Unbalanced load — the drum can't spin evenly.

Easy fix · 10–20 min
Error code

LG washer · OE

LG washer OE Error Code

Drain error — water isn't draining.

Easy fix · 20–30 min
Error code

LG washer · IE

LG washer IE Error Code

Water inlet error — the tub isn't filling.

Easy fix · 10–20 min
Error code

Samsung washer · LC

Samsung washer LC Error Code

Water level or leak error — water is detected where it doesn't belong.

Moderate
Chart

Washers

LG Washer Error Codes

Browse eighteen LG washer code pages, including distinct Ed1/Ed2 detergent warnings and ezDispense Ed5, with model…

Chart

Washers

Washer Error Codes by Brand

One chart for the common washer problems — drain, fill, unbalanced load, door, leak — and the code LG, Samsung and…

Error code

LG washer · dE

LG washer dE Error Code

The door has not closed or locked as required.

Check model first
Error code

LG washer · LE

LG washer LE Error Code

The tub cannot spin; LG identifies overload or an object in the tub as possible reasons.

Check model first
Error code

LG washer · PE

LG washer PE Error Code

LG reports a problem with the water-level sensor.

Call a pro
Error code

LG washer · tE

LG washer tE Error Code

Heating error; LG associates it with the thermistor that senses temperature.

Call a pro
Error code

Samsung washer · dC

Samsung washer dC Error Code

Model-dependent: a door error or an unbalanced-load error.

Check model first
Error code

Samsung washer · Ub

Samsung washer Ub Error Code

An unbalanced load prevented the cycle from completing.

Check model first
Chart

Washers

Samsung Washer Error Codes

Browse fourteen Samsung washer code pages with AC communication, 3C motor and tC sensing, model-dependent 3E meanings…

Chart

Washers

Whirlpool Washer Error Codes

Compare thirteen Whirlpool front-load code pages for water, doors, balance, foam and dispenser messages, with exact…

Error code

LG washer · Sud

LG Washer Sud Error Code

The washer has detected too much foam and is managing an oversudsing condition.

Check model first
Error code

LG washer · PF

LG Washer PF Error Code

Power was interrupted during operation; the display does not identify why the supply was lost.

Check model first
Error code

LG washer · CE

LG Washer CE Error Code

An overcurrent condition has been detected in the motor’s electrical circuit.

Call a pro
Error code

Samsung washer · OC

Samsung Washer OC Error Code

The washer reports an overflow condition: too much water is detected.

Call a pro
Error code

Samsung washer · 4C2

Samsung Washer 4C2 Error Code

The cold-water supply is unexpectedly hot; Samsung identifies reversed hot and cold connections.

Check model first
Error code

Samsung washer · SUd

Samsung Washer SUd Error Code

Excessive suds were detected; the washer pauses to let the foam settle before continuing.

Check model first
Error code

Whirlpool washer · F5 E1

Whirlpool Washer F5 E1 Error Code

Whirlpool identifies this front-load entry as a door-switch condition.

Check model first
Error code

Whirlpool washer · F5 E3

Whirlpool Washer F5 E3 Error Code

The cited Whirlpool front-load guidance says the door is not locking properly.

Check model first
Error code

Whirlpool washer · F7 E1

Whirlpool Washer F7 E1 Error Code

A motor-speed sensing error: the selected cycle speed is not being achieved.

Check model first
Error code

Whirlpool washer · Sud / Sd

Whirlpool Washer Sud / Sd Error Code

Excess suds are interfering with the wash or spin, so the washer adds rinsing and pauses.

Check model first
Error code

LG washer · dHE

LG Washer dHE Error Code

LG identifies a dry-function error on applicable washer-dryer equipment.

Check model first
Error code

LG washer · AE

LG Washer AE Error Code

The covered LG front-load entry reports internal leakage and activation of the leak-protection system.

Call a pro
Error code

LG washer · SE

LG Washer SE Error Code

LG’s front-load support describes SE as a sensor error requiring service if the limited restart does not resolve it.

Call a pro
Error code

Whirlpool washer · F0 E1

Whirlpool Washer F0 E1 Error Code

A load is detected while the Clean Washer maintenance cycle is selected; Whirlpool also lists rL for this condition.

Check model first
Error code

Whirlpool washer · F0 E5

Whirlpool Washer F0 E5 Error Code

The covered front-load washer reports an off-balance load, which can extend the cycle or reduce spin speed.

Check model first
Error code

Whirlpool washer · F8 E2

Whirlpool Washer F8 E2 Error Code

Whirlpool identifies a problem with the front-load washer’s dispenser system.

Check model first
Error code

Whirlpool washer · F8 E3

Whirlpool Washer F8 E3 Error Code

The washer reports an overflow condition involving too much water or foam.

Call a pro
Error code

Whirlpool washer · dET

Whirlpool Washer dET Error Code

The detergent dispenser cartridge is not detected on applicable cartridge-equipped front-load washers.

Check model first
Error code

LG washer · HE

LG Washer HE Error Code

According to LG, HE reports a heater error on the front-load models covered by its US guide.

Check model first
Error code

LG washer · vS

LG Washer vS Error Code

According to LG, vS concerns the vibration sensor; the display can resemble u5 or uS.

Check model first
Error code

Samsung washer · bE2

Samsung Washer bE2 Error Code

Samsung places bE2 in its stuck-button group, but BE2/8E2 means a MEMS sensor error on some models.

Check model first
Error code

Samsung washer · 9C1

Samsung Washer 9C1 Error Code

According to Samsung, 9C1 belongs to the washer electrical-supply irregularity group.

Call a pro
Error code

Samsung washer · ddC

Samsung Washer ddC Error Code

According to Samsung, ddC or dC3 means the Add Door is not detected as closed and locked.

Check model first
Error code

LG washer · Ed1 / Ed2

LG Washer Ed1 / Ed2 Error Code

LG identifies Ed1 and Ed2 as detergent-dispensing warnings, with different pump conditions reported.

Check model first
Error code

LG washer · Ed5

LG Washer Ed5 Error Code

LG identifies Ed5 as a communication problem involving the automatic detergent dispenser and its control system.

Check model first
Error code

Samsung washer · AC

Samsung Washer AC Error Code

Samsung lists AC as a washer communication error; the exact model determines the affected system.

Check model first
Error code

Samsung washer · 3C

Samsung Washer 3C Error Code

Samsung identifies washer 3C as a motor error. It does not by itself identify a failed motor or sensor.

Check model first
Error code

Samsung washer · tC

Samsung Washer tC Error Code

Samsung lists washer tC, tE and tE1 in its temperature-sensor error group.

Check model first