Guide
Symptom guide
Dryer Smells Like Burning or Runs Too Hot: What Is Normal and What Is a Fire Risk
A burning smell from a dryer can be harmless shipping oil or the first sign of a lint fire. How to tell which, what to…
On LG steam dryers, Add Water means the steam feeder is out of water. Fill it with tap water to MAX, restart the steam cycle, and know when the light points to a fault.
Only LG dryers with steam functions have an Add Water indicator. LG’s US code list describes it as a water supply error: the dryer needs water to make steam, and on models that use a refillable steam feeder the reservoir is empty or too low. It is not a report of a broken drying system. The fix is to refill correctly — the right water, to the right line — and to restart the steam cycle the way LG describes.
Steam needs a water source, and LG’s list covers two: a refillable steam feeder drawer, and a supply from a water tap through an inlet hose. This guide covers the feeder. If your dryer is connected to a tap and shows the steam water supply code E05, LG’s list sends you to the tap, the inlet hose and its inlet filter instead. The owner’s manual for your model shows which system you have and where the feeder drawer is.
Use the location shown in your owner’s manual.
Pour ordinary tap water up to the MAX line. LG says not to use distilled water.
Push it fully closed so it seats properly.
Select the steam cycle or option and start as usual.
Press Pause before opening the feeder drawer.
Add tap water to the MAX line and close the drawer.
Turn the dryer off and back on, as LG’s steps describe.
Select the steam cycle again and press Start/Pause.
| What you see | What it means |
|---|---|
| Add Water on a feeder model | The steam feeder needs water: refill to MAX. |
| E05 on a tap-connected model | Steam water supply problem: check the tap, inlet hose and inlet filter. |
| Add Water right after a correct refill | Recheck the drawer is closed; request service if it persists. |
Most Add Water messages end with a refill. Before calling, check three things: the feeder was filled with tap water up to the MAX line, the drawer clicked fully closed, and the dryer was switched off and on before you restarted the steam cycle, as LG’s steps describe. If all three are true and the message still returns, note the model number and request service.
LG says not to use distilled water in the steam feeder; use regular tap water.
The light concerns the steam function. Choose a non-steam cycle if you do not need steam; refill before the next steam cycle.
LG lists it with its codes as a water supply error, but on feeder models it is usually just a refill reminder.
Sources: According to the manufacturer; this is not an independent diagnosis.
LG USA: Dryer — Error Code List — checked 2026-10-26. Steam systems differ between models — follow the owner’s manual of your dryer.
Steam, door, sensor, airflow and power messages in one table.
Other LG dryer messages that are not faults.
Guide
Symptom guide
A burning smell from a dryer can be harmless shipping oil or the first sign of a lint fire. How to tell which, what to…
Dryers
LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…
Guide
Symptom guide
CL on an LG dryer is Child Lock, not an error code: the control panel is locked. On most models, hold the Child Lock key…
Guide
Symptom guide
Lint in the filter and the exhaust duct is the leading factor in home dryer fires. What owners can clean, how often,…
Error code
LG dryer · d80
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 minThank you! Your feedback helps us make this page better.
Could not send. Please try again.