Error code
LG dryer · d80
LG dryer d80 Error Code
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 minWhat it means
A temperature or temperature-sensor issue has been detected.
Check model firstSamsung US dryers using the temperature-code group that includes tC. The exhaust-vent checks below apply to vented dryers. Heat-pump or ventless models require their own maintenance instructions.
The display points to a temperature-related condition; it does not specify which sensor or circuit to replace. Record the full code before switching off, especially if there are extra characters. Use the appliance’s model label to distinguish a vented dryer from a heat-pump model before following a vent checklist.
| Condition | What it means for your next step |
|---|---|
| Restricted lint screen or exhaust | Samsung identifies trapped heat from lint or vent restriction as a possible source of temperature errors. |
| A persistent temperature error | If the error remains after the documented cleaning, Samsung directs the owner to service. |
Disconnect power before cleaning. Do not run another hot cycle while the error is active.
Remove lint and reinstall the screen according to the manual. Do not run the dryer with the screen missing.
Look for visible duct crushing and an obstructed exterior outlet only where safely accessible. Arrange professional cleaning for concealed or elevated ductwork.
After the permitted maintenance, follow the model manual for returning to use. If tC returns, stop and request service.
No. Samsung groups temperature and sensing issues together and includes airflow checks before service.
Do not apply the vented checklist to it. Follow the exact model’s filter and heat-exchanger instructions or ask Samsung.
Sources: According to the manufacturer. These references are manufacturer guidance, not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22.
Compare the covered codes and their model limits before choosing another procedure.
Use the page for the actual appliance and display.
Error code
LG dryer · d80
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 min
Error code
LG dryer · tE1
Thermistor error — the dryer's temperature sensor reported a problem.
Moderate
Error code
LG dryer · PS
Power supply error — improper voltage at the power cord.
Call a pro
Error code
Samsung dryer · HC
Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.
Call a pro
Error code
Samsung dryer · dC
A door, latch or door-detection problem.
Check model firstDryers
LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…
Dryers
Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…
Guide
Symptom guide
Distinguish no heat from warm but damp clothes, check the model’s cycle settings and accessible lint areas, and leave…
Error code
Samsung dryer · 9C1
Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.
Call a pro
Error code
Samsung dryer · bE
A control-panel button is being detected as stuck or continuously pressed.
Check model first
Error code
Samsung dryer · AC
Internal dryer components are not communicating with each other as expected.
Call a pro
Error code
Samsung dryer · FC
The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.
Call a pro
Error code
Samsung dryer · 3C
Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.
Call a pro
Error code
Samsung dryer · HC2
Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.
Call a pro
Guide
Symptom guide
A dryer that runs longer needs a check of the cycle, load and drying system. Use safe Samsung and LG references before…
Guide
Symptom guide
A powered dryer that will not start needs a code, Child Lock and door check. Use the Samsung timer test safely and…
Guide
Symptom guide
Read Samsung Vent Blockage test results with the correct model controls, a cool empty drum and safe next steps for…
Guide
Symptom guide
Samsung dryer dn means a firmware download is in progress. Leave power on, wait for the automatic restart and request…
Dryers
Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…
Error code
Samsung dryer · oD
Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.
Check model firstThank you! Your feedback helps us make this page better.
Could not send. Please try again.