Error code
LG dryer · d80
LG dryer d80 Error Code
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 minWhat it means
The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.
Call a proThis page follows Samsung US dryer support, which covers multiple display and control designs without an exhaustive model list. Confirm the complete code in the US manual for your model, including whether it is electric, gas or a different drying system. A washer or dishwasher code with the same letters is a separate entry. FC concerns frequency in this dryer list. An LG washer FE, for example, is an unrelated overfill entry.
Frequency and voltage are different electrical characteristics, so FC should not be relabeled as 9C1. Samsung’s owner guidance is short: try restarting the cycle, then request service if the code remains. It does not provide a user adjustment, an acceptable frequency range for every model or a DIY measurement procedure. Record any recent change in location or supply equipment for the technician without assuming it caused the warning.
| Condition | What it means for your next step |
|---|---|
| FC, FE or 1 FC on the dryer | Keep the code grouped with this appliance’s frequency guidance. |
| A different voltage-code group | Open the 9C1 page; do not erase the distinction between voltage and frequency. |
| Code remains after restarting the cycle | Stop retrying and obtain service or supply assessment. |
Photograph the display and check the US model manual. Do not search only FE without the brand and appliance.
Note recent electrical work or a move, and tell support if the supply differs from the original installation. Do not connect adapters or converters as a trial.
Samsung allows restarting the cycle for this group. Do not restart with electrical damage, smoke or repeated breaker trips.
If the warning remains, contact Samsung. An electrician should handle any necessary supply measurements; the owner should not open terminals.
No. Samsung separates frequency errors from voltage errors in the US dryer reference.
The source does not prescribe an adapter or converter. Have a professional confirm the installation requirements.
No. In this Samsung dryer group FE is a frequency alias; washer FE definitions belong to their own models.
Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22.
Keep the full model and complete display with the appliance type when choosing a procedure.
Each reference has its own model and service limits.
Error code
LG dryer · d80
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 min
Error code
LG dryer · tE1
Thermistor error — the dryer's temperature sensor reported a problem.
Moderate
Error code
LG dryer · PS
Power supply error — improper voltage at the power cord.
Call a pro
Error code
Samsung dryer · tC
A temperature or temperature-sensor issue has been detected.
Check model first
Error code
Samsung dryer · HC
Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.
Call a pro
Error code
Samsung dryer · dC
A door, latch or door-detection problem.
Check model firstDryers
LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…
Dryers
Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…
Guide
Symptom guide
Distinguish no heat from warm but damp clothes, check the model’s cycle settings and accessible lint areas, and leave…
Error code
Samsung dryer · 9C1
Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.
Call a pro
Error code
Samsung dryer · bE
A control-panel button is being detected as stuck or continuously pressed.
Check model first
Error code
Samsung dryer · AC
Internal dryer components are not communicating with each other as expected.
Call a pro
Error code
Samsung dryer · 3C
Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.
Call a pro
Error code
Samsung dryer · HC2
Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.
Call a pro
Guide
Symptom guide
A dryer that runs longer needs a check of the cycle, load and drying system. Use safe Samsung and LG references before…
Guide
Symptom guide
A powered dryer that will not start needs a code, Child Lock and door check. Use the Samsung timer test safely and…
Guide
Symptom guide
Read Samsung Vent Blockage test results with the correct model controls, a cool empty drum and safe next steps for…
Guide
Symptom guide
Samsung dryer dn means a firmware download is in progress. Leave power on, wait for the automatic restart and request…
Dryers
Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…
Error code
Samsung dryer · oD
Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.
Check model firstThank you! Your feedback helps us make this page better.
Could not send. Please try again.