Find your code

Samsung Dryer bE Error Code

By ApplianceCodeHQ Editorial Updated

bE

What it means

A control-panel button is being detected as stuck or continuously pressed.

Check model first

Jump to the fix

Applies to these models and systems

This page follows Samsung US dryer support, which covers multiple display and control designs without an exhaustive model list. Confirm the complete code in the US manual for your model, including whether it is electric, gas or a different drying system. A washer or dishwasher code with the same letters is a separate entry. The cited dryer group includes bE, bE2, bC2, 6E, 6E2 and 6C2. It is not the LG dishwasher bubble-error meaning.

What bE means

The control is reporting a button input that remains active. Samsung’s owner procedure is limited to turning the dryer off and touching and releasing each button. That does not authorize opening the console, spraying liquid into seams or deciding that the main board is defective. Record whether a particular button feels different or the display returns without anyone touching the panel.

Documented conditions and next steps

Manufacturer guidance; no failure probabilities assigned
ConditionWhat it means for your next step
A button feels held down Use only normal fingertip movement after powering off.
A button is cracked or will not return Service is appropriate; do not pry it with a tool.
No physical difference, but the code returns The control input still needs diagnosis even if the panel looks normal.

Safe checks before a repair

  1. Read the complete code

    Save the characters and model. A 6-shaped display may be an alias in this dryer group, but do not guess from another appliance.

  2. Turn the dryer off

    Use the normal Power control before the button check. Do not apply this procedure while dn indicates a firmware update.

  3. Check the buttons normally

    Samsung directs touching and releasing each button, including its edges. Use light normal pressure, without tools, cleaner spray or dismantling.

  4. Turn on and observe once

    If the code returns or any button is damaged, stop and request service rather than repeatedly pressing harder.

Frequently asked questions

Does bE mean there is too much detergent?

Not on this Samsung dryer entry. It concerns a button; LG dishwasher bE has a separate foam meaning.

Can I use a screwdriver to release a button?

No. Use normal fingertip operation. A stuck or damaged part that does not recover needs service.

Is this the same as Child Lock?

No. Child Lock is a control setting with its own model-specific release procedure.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22.

Samsung Dryer error codes

Keep the full model and complete display with the appliance type when choosing a procedure.

Open the reference

Related codes and next steps

Each reference has its own model and service limits.

Related codes & guides

Error code

LG dryer · d80

LG dryer d80 Error Code

Exhaust vent about 80% restricted — clean the duct.

Easy fix · 30–60 min
Error code

LG dryer · tE1

LG dryer tE1 Error Code

Thermistor error — the dryer's temperature sensor reported a problem.

Moderate
Error code

LG dryer · PS

LG dryer PS Error Code

Power supply error — improper voltage at the power cord.

Call a pro
Error code

Samsung dryer · tC

Samsung dryer tC Error Code

A temperature or temperature-sensor issue has been detected.

Check model first
Error code

Samsung dryer · HC

Samsung dryer HC Error Code

Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.

Call a pro
Chart

Dryers

LG Dryer Error Codes

LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…

Chart

Dryers

Samsung Dryer Error Codes

Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…

Error code

Samsung dryer · 9C1

Samsung Dryer 9C1 Error Code

Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.

Call a pro
Error code

Samsung dryer · AC

Samsung Dryer AC Error Code

Internal dryer components are not communicating with each other as expected.

Call a pro
Error code

Samsung dryer · FC

Samsung Dryer FC Error Code

The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.

Call a pro
Error code

Samsung dryer · 3C

Samsung Dryer 3C Error Code

Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.

Call a pro
Error code

Samsung dryer · HC2

Samsung Dryer HC2 Error Code

Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.

Call a pro
Chart

Dryers

Dryer Error Codes by Brand

Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…

Error code

Samsung dryer · oD

Samsung Dryer oD Error Code

Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.

Check model first

Other codes