Error code
LG dryer · d80
LG dryer d80 Error Code
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 minA powered dryer that will not start needs a code, Child Lock and door check. Use the Samsung timer test safely and recognize when service is needed.
A lit panel does not prove that a drying cycle has started. Distinguish a dryer with no power from one that accepts settings but never tumbles. Samsung’s no-spin support uses an observable timer check to separate a cycle that has not started from a cycle that counts down while the drum stays still. That distinction avoids guessing at a belt, motor or control board from an unresponsive Start button.
The timed-cycle check below follows Samsung US support for applicable dryers with a digital timer and Time Dry. Models without that display cannot use the same observation. For LG or another brand, use the exact owner’s manual for control and start behavior; the Samsung sequence is not a universal dryer test. Gas, electric and ventless models may also have different installation requirements.
| What you see | Next step |
|---|---|
| An error code or blinking warning | Record it and use the appropriate code procedure first. |
| dn on the display | Leave power on for the firmware download; do not apply an ordinary restart. |
| A Child Lock indicator | Use the exact labeled release controls; restarting does not necessarily remove the setting. |
| Countdown running, but no drum movement | Samsung directs service after the applicable timed-cycle check. |
Photograph the full display. Door dC, button bE and motor 3C need their own pages; do not shorten or combine them.
Use the manual or the labels on the panel. The button combination and temporary-off behavior vary; a lock icon is not proof of a broken console.
Remove clothing caught in the opening and close the door without slamming it. Damage to the latch or door needs service; do not bypass its switch.
On a supported Samsung digital model, select Time Dry and hold Start as the manual directs. Observe whether the minutes count down over the next one to two minutes.
If the timer counts down with no rotation, stop and request service. If it never starts, review the door and correct start controls; contact support if those checks do not resolve it.
Provide the model, the complete warning, whether the timer advanced and whether the drum moved at all. Note recent installation or relocation without assuming it caused the failure. If the model has no timer for this check, say that directly. The absence of a display test is not a reason to remove panels and recreate a technician’s electrical checks.
No. It only shows that part of the appliance has power. Supply and terminal checks belong to a professional.
No. Never reach into or assist a powered drum, and never defeat the door interlock.
No. Samsung specifically warns against interrupting that firmware-download state. Use the separate dn guide.
Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dryer turns on but will not start or spin — checked 2026-10-22.
Samsung US: Use Child Lock on your washer and dryer — checked 2026-10-22.
Samsung US: Dryer displays an error code — checked 2026-10-22.
Use the actual model and full display before choosing a procedure.
Error code
LG dryer · d80
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 min
Error code
LG dryer · tE1
Thermistor error — the dryer's temperature sensor reported a problem.
Moderate
Error code
LG dryer · PS
Power supply error — improper voltage at the power cord.
Call a pro
Error code
Samsung dryer · tC
A temperature or temperature-sensor issue has been detected.
Check model first
Error code
Samsung dryer · HC
Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.
Call a pro
Error code
Samsung dryer · dC
A door, latch or door-detection problem.
Check model firstDryers
LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…
Dryers
Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…
Guide
Symptom guide
Distinguish no heat from warm but damp clothes, check the model’s cycle settings and accessible lint areas, and leave…
Error code
Samsung dryer · 9C1
Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.
Call a pro
Error code
Samsung dryer · bE
A control-panel button is being detected as stuck or continuously pressed.
Check model first
Error code
Samsung dryer · AC
Internal dryer components are not communicating with each other as expected.
Call a pro
Error code
Samsung dryer · FC
The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.
Call a pro
Error code
Samsung dryer · 3C
Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.
Call a pro
Error code
Samsung dryer · HC2
Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.
Call a pro
Guide
Symptom guide
A dryer that runs longer needs a check of the cycle, load and drying system. Use safe Samsung and LG references before…
Guide
Symptom guide
Read Samsung Vent Blockage test results with the correct model controls, a cool empty drum and safe next steps for…
Guide
Symptom guide
Samsung dryer dn means a firmware download is in progress. Leave power on, wait for the automatic restart and request…
Dryers
Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…
Error code
Samsung dryer · oD
Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.
Check model firstThank you! Your feedback helps us make this page better.
Could not send. Please try again.