Error code
LG dryer · d80
LG dryer d80 Error Code
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 minSamsung US dryers covered by the door-code group dC/dE/dF/do/d0 and listed variants. This is not the model-dependent Samsung washer dC balance code. Confirm the dryer’s own information-code table.
Start with the appliance type. Searching only for Samsung dC can lead to washer load-balancing advice that does not apply to a dryer. Note whether the door will close and stay shut, and whether the fault appears before the drum starts. Those observations are more useful than guessing a switch part number.
| Condition | What it means for your next step |
|---|---|
| Something prevents closure | Samsung asks owners to check for laundry or other items in the door. |
| Door or latch damage | A damaged latch or a door that cannot be secured is a service condition in Samsung’s guidance. |
Turn the dryer off, wait until movement stops and disconnect power before examining the opening.
Move trapped fabric away from the door and gasket. Look for visible latch damage without taking it apart.
If nothing is damaged, close the door and follow the model’s normal start procedure. Stop if the error remains or the door will not stay closed.
Samsung’s US dryer list, rechecked on 2026-10-26, puts dC in a door group together with dE, dF, do, d0 and the variants 1 DC and 1 dF, so the same response applies to all of them on a Samsung dryer. LG uses dE for its own door error, described as the door not being fully closed. The two brands agree on the owner part: remove anything caught in the door, close it normally and restart, and arrange service if the code remains. LG adds one detail worth checking on any dryer — a lint filter that is not pushed fully into its slot.
| Brand | Door codes | Owner part |
|---|---|---|
| Samsung | dC, dE, dF, do, d0, 1 DC, 1 dF | Check the door area for laundry, close normally, service if it remains |
| LG | dE | Seat the lint filter, clear the door, power-cycle, restart; service if it returns |
A door code is not an airflow code. While the door is open anyway, clean the lint filter and make sure it is fully seated; that is routine fire-safety maintenance in any case, and the vent itself deserves a check at least once a year.
Move fabric only if it obstructs the door. The washer’s balance-code meaning is not the dryer’s door-code meaning.
The cited dryer entry directs closure checks and service for a remaining error. It does not establish a universal button sequence.
Sources: According to the manufacturer. These references are manufacturer guidance, not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22, door group rechecked 2026-10-26.
LG USA: Dryer — Error Code List — checked 2026-10-26.
Compare the covered codes and their model limits before choosing another procedure.
Use the page for the actual appliance and display.
Error code
LG dryer · d80
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 min
Error code
LG dryer · tE1
Thermistor error — the dryer's temperature sensor reported a problem.
Moderate
Error code
LG dryer · PS
Power supply error — improper voltage at the power cord.
Call a pro
Error code
Samsung dryer · tC
A temperature or temperature-sensor issue has been detected.
Check model first
Error code
Samsung dryer · HC
Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.
Call a proDryers
LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…
Dryers
Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…
Guide
Symptom guide
Distinguish no heat from warm but damp clothes, check the model’s cycle settings and accessible lint areas, and leave…
Error code
Samsung dryer · 9C1
Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.
Call a pro
Error code
Samsung dryer · bE
A control-panel button is being detected as stuck or continuously pressed.
Check model first
Error code
Samsung dryer · AC
Internal dryer components are not communicating with each other as expected.
Call a pro
Error code
Samsung dryer · FC
The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.
Call a pro
Error code
Samsung dryer · 3C
Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.
Call a pro
Error code
Samsung dryer · HC2
Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.
Call a pro
Guide
Symptom guide
A dryer that runs longer needs a check of the cycle, load and drying system. Use safe Samsung and LG references before…
Guide
Symptom guide
A powered dryer that will not start needs a code, Child Lock and door check. Use the Samsung timer test safely and…
Guide
Symptom guide
Read Samsung Vent Blockage test results with the correct model controls, a cool empty drum and safe next steps for…
Guide
Symptom guide
Samsung dryer dn means a firmware download is in progress. Leave power on, wait for the automatic restart and request…
Dryers
Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…
Error code
Samsung dryer · oD
Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.
Check model firstThank you! Your feedback helps us make this page better.
Could not send. Please try again.