Error code
LG dryer · d80
LG dryer d80 Error Code
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 minWhat it means
Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.
Call a proThis page follows Samsung US dryer support, which covers multiple display and control designs without an exhaustive model list. Confirm the complete code in the US manual for your model, including whether it is electric, gas or a different drying system. A washer or dishwasher code with the same letters is a separate entry. The US list groups 9C1, 9E, 2E and 9E1. Its multi-control exception applies only to the described stacked washer/dryer arrangement.
The general 9C1 group concerns abnormal supplied voltage. Samsung also describes a special case: a washer controlling a stacked dryer through a multi-control kit can report dryer 9C1 when dryer control is attempted within five seconds of turning the washer on. Samsung supplies a SmartThings software update for that situation. That exception does not establish that a standalone dryer’s electrical warning is a software issue.
| Condition | What it means for your next step |
|---|---|
| Standalone dryer or no matching multi-control setup | Use the supply-voltage path and arrange professional assessment if the warning persists. |
| Matching stacked system and immediate remote control attempt | Record the timing and ask Samsung about the documented software update. |
| Damaged wiring, heat at the plug or repeated trips | Stop use; do not keep restarting to obtain a successful cycle. |
Note whether 9C1 is on the dryer or reported through the washer, plus both model numbers and any multi-control kit.
Samsung calls for the dryer’s own circuit and no extension cord. Do not pull out a stacked unit or open a terminal cover to verify connections.
For the documented multi-control case, follow Samsung’s SmartThings update instructions. The dryer can be unresponsive during installation; do not interrupt an update.
Have an electrician or qualified installer verify the supply and electric-dryer cord installation. Persistent 9C1 needs Samsung service.
No. The software exception is specific to the described stacked multi-control situation; ordinary supply warnings still need assessment.
No. It reports a voltage condition or the documented control interaction, not a confirmed part failure.
This guide leaves live voltage and dryer terminal measurements to a qualified professional.
Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22.
Keep the full model and complete display with the appliance type when choosing a procedure.
Each reference has its own model and service limits.
Error code
LG dryer · d80
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 min
Error code
LG dryer · tE1
Thermistor error — the dryer's temperature sensor reported a problem.
Moderate
Error code
LG dryer · PS
Power supply error — improper voltage at the power cord.
Call a pro
Error code
Samsung dryer · tC
A temperature or temperature-sensor issue has been detected.
Check model first
Error code
Samsung dryer · HC
Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.
Call a pro
Error code
Samsung dryer · dC
A door, latch or door-detection problem.
Check model firstDryers
LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…
Dryers
Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…
Guide
Symptom guide
Distinguish no heat from warm but damp clothes, check the model’s cycle settings and accessible lint areas, and leave…
Error code
Samsung dryer · bE
A control-panel button is being detected as stuck or continuously pressed.
Check model first
Error code
Samsung dryer · AC
Internal dryer components are not communicating with each other as expected.
Call a pro
Error code
Samsung dryer · FC
The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.
Call a pro
Error code
Samsung dryer · 3C
Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.
Call a pro
Error code
Samsung dryer · HC2
Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.
Call a pro
Guide
Symptom guide
A dryer that runs longer needs a check of the cycle, load and drying system. Use safe Samsung and LG references before…
Guide
Symptom guide
A powered dryer that will not start needs a code, Child Lock and door check. Use the Samsung timer test safely and…
Guide
Symptom guide
Read Samsung Vent Blockage test results with the correct model controls, a cool empty drum and safe next steps for…
Guide
Symptom guide
Samsung dryer dn means a firmware download is in progress. Leave power on, wait for the automatic restart and request…
Dryers
Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…
Error code
Samsung dryer · oD
Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.
Check model firstThank you! Your feedback helps us make this page better.
Could not send. Please try again.