Find your code

Samsung Dryer 3C Error Code

By ApplianceCodeHQ Editorial Updated

3C

What it means

Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.

Call a pro

Jump to the fix

Applies to these models and systems

This page follows Samsung US dryer support, which covers multiple display and control designs without an exhaustive model list. Confirm the complete code in the US manual for your model, including whether it is electric, gas or a different drying system. A washer or dishwasher code with the same letters is a separate entry. The US article lists 3C under other errors, without mapping a specific motor component to every dryer model.

What 3C means

The code identifies a motor-related problem but does not establish whether the motor itself, a control or another internal condition is responsible. Samsung places 3C in a group with a two-to-three-minute power-off recovery, followed by exact-manual checks and service if the warning returns. A stationary drum without any code is a different troubleshooting starting point; do not infer 3C merely because laundry is not tumbling.

Documented conditions and next steps

Manufacturer guidance; no failure probabilities assigned
ConditionWhat it means for your next step
3C appears during an attempted cycle Save the code and describe whether there was movement, sound or an immediate stop.
No code, but the drum never starts Use the no-start guide to distinguish an unstarted cycle or Child Lock from a running timer with no rotation.
3C returns after the permitted recovery The motor-related system needs professional diagnosis.

Safe checks before a repair

  1. Record what actually happened

    Save the display, model, program and whether the drum began moving. Do not reach into a running drum or rotate it by force.

  2. Check for an unsafe condition

    Smoke, a burning smell, severe mechanical noise or damaged wiring means stop rather than retry.

  3. Use Samsung’s recovery when applicable

    Power the dryer off for two to three minutes, turn it back on and restart the cycle as directed. Check the model manual if it gives more specific instructions.

  4. Stop if the warning returns

    Contact support with the code and observations. Do not remove the cabinet to inspect a belt, switch, motor or wiring.

Frequently asked questions

Must I replace the motor?

No. The code is a motor-error label, not a confirmed component diagnosis or repair quote.

Is dishwasher 3C the same repair?

No. Samsung dishwasher 3C concerns pump operation. Appliance type changes the meaning.

Should I push the drum to get it started?

No. Do not assist a powered drum by hand or defeat the door switch.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22.

Samsung Dryer error codes

Keep the full model and complete display with the appliance type when choosing a procedure.

Open the reference

Related codes and next steps

Each reference has its own model and service limits.

Related codes & guides

Error code

LG dryer · d80

LG dryer d80 Error Code

Exhaust vent about 80% restricted — clean the duct.

Easy fix · 30–60 min
Error code

LG dryer · tE1

LG dryer tE1 Error Code

Thermistor error — the dryer's temperature sensor reported a problem.

Moderate
Error code

LG dryer · PS

LG dryer PS Error Code

Power supply error — improper voltage at the power cord.

Call a pro
Error code

Samsung dryer · tC

Samsung dryer tC Error Code

A temperature or temperature-sensor issue has been detected.

Check model first
Error code

Samsung dryer · HC

Samsung dryer HC Error Code

Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.

Call a pro
Chart

Dryers

LG Dryer Error Codes

LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…

Chart

Dryers

Samsung Dryer Error Codes

Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…

Error code

Samsung dryer · 9C1

Samsung Dryer 9C1 Error Code

Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.

Call a pro
Error code

Samsung dryer · bE

Samsung Dryer bE Error Code

A control-panel button is being detected as stuck or continuously pressed.

Check model first
Error code

Samsung dryer · AC

Samsung Dryer AC Error Code

Internal dryer components are not communicating with each other as expected.

Call a pro
Error code

Samsung dryer · FC

Samsung Dryer FC Error Code

The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.

Call a pro
Error code

Samsung dryer · HC2

Samsung Dryer HC2 Error Code

Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.

Call a pro
Chart

Dryers

Dryer Error Codes by Brand

Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…

Error code

Samsung dryer · oD

Samsung Dryer oD Error Code

Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.

Check model first

Other codes