Find your code

Samsung Dryer HC2 Error Code

By ApplianceCodeHQ Editorial Updated

HC2

What it means

Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.

Call a pro

Jump to the fix

Applies to these models and systems

This page follows Samsung US dryer support, which covers multiple display and control designs without an exhaustive model list. Confirm the complete code in the US manual for your model, including whether it is electric, gas or a different drying system. A washer or dishwasher code with the same letters is a separate entry. This meaning is for applicable gas dryers. If an electric model appears to show HC2, verify the display with Samsung rather than applying gas instructions.

What HC2 means

The US dryer list distinguishes HC2 from HC, hE and HC4. That distinction prevents a gas-ignition warning from being treated only as a lint-filter issue. The support article offers a two-to-three-minute power-off recovery for its other-error group, including HC2, and service if the error returns. It does not authorize an owner to adjust gas pressure, inspect a burner or repeatedly attempt ignition.

Documented conditions and next steps

Manufacturer guidance; no failure probabilities assigned
ConditionWhat it means for your next step
Gas odor or suspected gas escape Leave without using switches or plugs; call the gas utility from outside. Do not attempt the restart.
HC2 with no gas odor or other unsafe sign Use only the exact model’s documented limited recovery, or contact service directly.
HC rather than HC2 Open the separate heating-code page. Retain every character before choosing a procedure.

Safe checks before a repair

  1. Apply the gas-odor rule first

    If gas is suspected, leave the area and call the gas utility from outside. Do not switch the dryer off, unplug it or operate lights on the way out.

  2. Record the code when safe

    Save HC2, the gas-dryer model and when the cycle stopped. Note recent installation for the service provider.

  3. Keep any recovery limited

    With no odor, damage or other hazard, Samsung’s group procedure allows power off for two to three minutes and one cycle restart. Follow the exact manual or choose service if uncertain.

  4. Stop after a returning warning

    Do not continue ignition attempts. Arrange qualified dryer service; internal gas and electrical work is outside owner maintenance.

Frequently asked questions

Can I treat HC2 as HC?

No. Samsung lists HC2 as gas ignition and HC in a separate heating group. Keep the suffix.

Should I unplug if I smell gas?

No. Leave without operating electrical switches or plugs and call the gas utility from outside.

Can I clean or adjust the burner myself?

This guide provides no burner, gas-valve or pressure-adjustment procedure. Use a qualified professional.

Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22.

Samsung Dryer error codes

Keep the full model and complete display with the appliance type when choosing a procedure.

Open the reference

Related codes and next steps

Each reference has its own model and service limits.

Related codes & guides

Error code

LG dryer · d80

LG dryer d80 Error Code

Exhaust vent about 80% restricted — clean the duct.

Easy fix · 30–60 min
Error code

LG dryer · tE1

LG dryer tE1 Error Code

Thermistor error — the dryer's temperature sensor reported a problem.

Moderate
Error code

LG dryer · PS

LG dryer PS Error Code

Power supply error — improper voltage at the power cord.

Call a pro
Error code

Samsung dryer · tC

Samsung dryer tC Error Code

A temperature or temperature-sensor issue has been detected.

Check model first
Error code

Samsung dryer · HC

Samsung dryer HC Error Code

Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.

Call a pro
Chart

Dryers

LG Dryer Error Codes

LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…

Chart

Dryers

Samsung Dryer Error Codes

Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…

Error code

Samsung dryer · 9C1

Samsung Dryer 9C1 Error Code

Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.

Call a pro
Error code

Samsung dryer · bE

Samsung Dryer bE Error Code

A control-panel button is being detected as stuck or continuously pressed.

Check model first
Error code

Samsung dryer · AC

Samsung Dryer AC Error Code

Internal dryer components are not communicating with each other as expected.

Call a pro
Error code

Samsung dryer · FC

Samsung Dryer FC Error Code

The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.

Call a pro
Error code

Samsung dryer · 3C

Samsung Dryer 3C Error Code

Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.

Call a pro
Chart

Dryers

Dryer Error Codes by Brand

Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…

Error code

Samsung dryer · oD

Samsung Dryer oD Error Code

Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.

Check model first

Other codes