Error code
LG dryer · d80
LG dryer d80 Error Code
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 minWhat it means
Internal dryer components are not communicating with each other as expected.
Call a proThis page follows Samsung US dryer support, which covers multiple display and control designs without an exhaustive model list. Confirm the complete code in the US manual for your model, including whether it is electric, gas or a different drying system. A washer or dishwasher code with the same letters is a separate entry. Samsung’s dryer communication group includes AC, Et, AE, EEE, AE4, AE3, AE5, E3 and 1 AC. Do not infer additional aliases.
An internal communication error is different from losing the home Wi-Fi connection. Samsung’s definition concerns communication among dryer components, and its owner response is a sixty-second shutdown followed by service if the warning remains. The article does not identify which board, connector or wire is responsible in your machine. Resetting a router is not the documented repair for this code.
| Condition | What it means for your next step |
|---|---|
| AC or one of the listed dryer aliases | Use the communication-code procedure for the exact model. |
| A separate SmartThings connection problem without AC | Use the app or network setup guidance instead of assuming this hardware warning. |
| Communication warning remains after the restart | Arrange professional diagnosis without opening the console. |
Photograph all characters, including any leading 1. Note an outage, recent installation or other warning.
If the screen says dn rather than AC, follow the download guide and leave power on. Similar unresponsive controls can have different causes.
For the actual communication code, shut the dryer off for sixty seconds and turn it on again when safe. Follow the exact manual for the model’s power procedure.
If the warning remains, request service. Do not reseat internal connectors or swap boards based on the display.
The cited entry describes internal component communication, not a home-network login failure.
No. Samsung gives one initial shutdown and directs service if the code remains.
No. That refrigerator entry has a different procedure and service boundary. Appliance type matters.
Sources: According to the manufacturer for appliance behavior; this is not an independent diagnosis.
Samsung US: Dryer displays an error code — checked 2026-10-22.
Keep the full model and complete display with the appliance type when choosing a procedure.
Each reference has its own model and service limits.
Error code
LG dryer · d80
Exhaust vent about 80% restricted — clean the duct.
Easy fix · 30–60 min
Error code
LG dryer · tE1
Thermistor error — the dryer's temperature sensor reported a problem.
Moderate
Error code
LG dryer · PS
Power supply error — improper voltage at the power cord.
Call a pro
Error code
Samsung dryer · tC
A temperature or temperature-sensor issue has been detected.
Check model first
Error code
Samsung dryer · HC
Heating error, generally excessive heat; Samsung also notes a low-voltage exception on electric dryers.
Call a pro
Error code
Samsung dryer · dC
A door, latch or door-detection problem.
Check model firstDryers
LG dryer codes by family: door, humidity sensor, temperature sensor, airflow and power, plus the Add Water and Child…
Dryers
Find ten Samsung dryer code pages, including oD dry-time reporting, with model-specific safe checks, service limits…
Guide
Symptom guide
Distinguish no heat from warm but damp clothes, check the model’s cycle settings and accessible lint areas, and leave…
Error code
Samsung dryer · 9C1
Samsung groups 9C1 with supply-voltage warnings; some stacked multi-control installations have a specific software exception.
Call a pro
Error code
Samsung dryer · bE
A control-panel button is being detected as stuck or continuously pressed.
Check model first
Error code
Samsung dryer · FC
The dryer reports an invalid power-source frequency; Samsung also lists FE and 1 FC in this group.
Call a pro
Error code
Samsung dryer · 3C
Samsung lists 3C as a dryer motor error, with service required if the documented recovery does not resolve it.
Call a pro
Error code
Samsung dryer · HC2
Samsung lists HC2 as a gas-ignition error; the final 2 distinguishes it from the general HC heating group.
Call a pro
Guide
Symptom guide
A dryer that runs longer needs a check of the cycle, load and drying system. Use safe Samsung and LG references before…
Guide
Symptom guide
A powered dryer that will not start needs a code, Child Lock and door check. Use the Samsung timer test safely and…
Guide
Symptom guide
Read Samsung Vent Blockage test results with the correct model controls, a cool empty drum and safe next steps for…
Guide
Symptom guide
Samsung dryer dn means a firmware download is in progress. Leave power on, wait for the automatic restart and request…
Dryers
Compare covered LG and Samsung dryer warnings by reported system, with separate boundaries for vented, electric, gas and…
Error code
Samsung dryer · oD
Samsung identifies oD as a Dry Time Error and directs owners to a limited recovery followed by service if it returns.
Check model firstThank you! Your feedback helps us make this page better.
Could not send. Please try again.