Appliance Cycle Cost Calculator
Estimate electricity, water and sewer cost per appliance cycle, then scale your own consumption and rates to weekly use and 52 weeks.
Use this calculator for a washer, dishwasher or other appliance with a defined cycle. It adds the electricity cost for one cycle to the variable water and sewer cost for that cycle, then scales the result to your chosen weekly schedule. Enter documented consumption for the exact model, program and options, or a suitable existing measurement. The tool does not know a model’s consumption from its brand or error code.
What the formula includes
Electricity per cycle ($) = kWh per cycle × electricity cents/kWh ÷ 100
Water and sewer per cycle ($) = US gallons per cycle × combined $/1,000 US gallons ÷ 1,000
Combined cycle cost = electricity cost + water and sewer cost
Weekly cost = combined cycle cost × cycles per week
52-week cost = weekly cost × 52
Annual energy and water totals use the same 52-week schedule. Intermediate values remain unrounded; only displayed results are rounded, so multiplying a displayed two-decimal cycle price can differ slightly from the annual result. Fifty-two weeks is the tool’s scenario convention, not a prediction that every week will have the same laundry or dishwashing demand.
Find inputs that describe the same cycle
| Input | What to check |
|---|---|
| Electricity per cycle | Use kWh for the chosen program and options. Do not substitute rated watts or an annual EnergyGuide figure. |
| Water per cycle | Use US gallons for that same program. Keep liters, imperial gallons and cubic feet out of this field. |
| Cycles per week | Use a representative average. A fractional value can describe alternating weekly schedules. |
| Combined water and sewer rate | Add only applicable volume-based charges on a consistent per-1,000-gallon basis. Exclude base fees. |
EPA explains that water bills may use gallons or CCF, and that one CCF is about 748 gallons. Confirm any rate conversion with your utility. A sewer bill based on a seasonal allowance or a minimum charge will not necessarily fall by the amount estimated here. The tool applies one combined variable rate to all entered gallons; it cannot reproduce a tiered water bill.
Worked hypothetical example
Suppose one cycle uses 1.2 kWh and 12 US gallons, electricity costs 20 cents/kWh, and the combined variable water/sewer rate is $15 per 1,000 gallons. Electricity contributes $0.24 and water/sewer contributes $0.18, giving $0.42 per cycle. Five cycles per week produce $2.10 weekly and $109.20 over 52 weeks, using 312 kWh and 3,120 gallons. These inputs illustrate arithmetic and do not describe a particular model or a current average tariff.
Safe checks and service limits
-
Identify the measurement boundary
A reading at the appliance normally does not include a separate water heater. Include external electric water-heating energy only if it is already part of a defensible kWh input, without counting it twice.
-
Check the bill components
Use applicable variable charges and keep fixed service fees separate. Gas, detergent, repairs and purchase costs are outside this calculation.
-
Keep operation within the owner’s manual
Do not change water-heater settings, appliance wiring or required wash settings simply to improve the result. Obtain missing cycle data from the manufacturer.
Frequently asked questions
Does this include the cost of heating incoming water?
Only when that energy is already included in your electricity input. Separate gas water heating and unmeasured external electric heating are excluded.
Can I use it for an electric dryer?
Yes, with a supported kWh-per-cycle input. Enter zero water unless the selected model and cycle actually use water, and keep any gas energy outside this electricity calculation.
Why can annual cost be positive when a displayed component rounds to zero?
A small per-cycle amount can round to $0.00 while its unrounded value adds up over many cycles. Annual totals use the unrounded arithmetic.
Will this match my entire utility bill?
No. It estimates the selected appliance’s variable electricity and water costs under a constant-use scenario. Fixed fees, tiers and other household use remain separate.
Sources: Official US public guidance. Calculations and worked examples are editorial arithmetic using stated inputs, not measured model performance or guaranteed savings.
US EIA: Measuring electricity — checked 2026-10-22.
US EPA WaterSense: Understanding Your Water Bill — checked 2026-10-22.
Related tools and input guides
Water differences and complete purchase quotes
Compare water use using documented gallons per cycle at the same workload, and keep variable water/sewer charges separate from fixed fees. For a replacement quote, add only extra delivery, installation, removal, parts and quoted tax not included elsewhere. Neither calculation supplies a lifespan or predicts future repairs.
Water and upfront purchase calculators
Report an error
Thank you! Your feedback helps us make this page better.
Could not send. Please try again.
- Plain-English steps no service-manual jargon
- Model limits and service advice check the exact appliance first
- Safety before maintenance clear limits for owner checks
- Free, no sign-up no repair-service ads in the text