Appliance Standby Cost Calculator
Convert a documented standby wattage and your own hours, days and electricity rate into a transparent energy and cost scenario.
Estimate the electricity cost of one specified standby mode. Enter its documented or suitably measured average wattage, how many hours the device spends in that mode on a scheduled day, how many such days occur in your year, and your electricity rate. The result covers that mode and schedule only. It does not estimate active washing, heating, drying or refrigeration energy.
Energy and cost formula
Standby kWh per scheduled day = standby watts × hours per day ÷ 1,000
Standby kWh for the year = daily standby kWh × selected days per year
Standby cost ($) = standby kWh × electricity cents/kWh ÷ 100
Total standby hours = hours per day × selected days
Watts describe power, while kWh describes energy over time. This scenario holds the entered average standby power constant during the selected hours. A device that changes modes needs separate estimates with nonoverlapping hours. Do not count active-use hours as standby hours or add standby energy to a whole-appliance annual measurement that already includes it.
Choose a defensible wattage and schedule
| Input | Practical boundary |
|---|---|
| Standby watts | Use the exact model and mode. A display-on state, connected standby and another low-power state may have different measured consumption. |
| Hours per scheduled day | Enter only time in this mode, from zero to 24 hours. Other modes are outside the result. |
| Days per year | Enter the schedule you want to examine, including fewer than a full year or up to 366 days for a leap-year scenario. |
| Electricity price | Use your applicable variable cents/kWh price. Fixed charges and time-of-use variation are excluded. |
DOE distinguishes a stable power reading from fluctuating consumption that needs a time-averaged measurement. A single momentary reading may therefore be unsuitable. Use an existing documented value or obtain appropriate measurement advice; this page does not provide a procedure for opening an appliance or working on its electrical supply. Berkeley Lab also explains that standby can support useful functions, so its cost is not automatically avoidable waste.
Worked hypothetical example
A hypothetical device averaging 5 watts in the chosen mode for 20 hours per day over 365 days uses 36.5 kWh in that mode. At 18 cents/kWh, its annual standby cost is $6.57. The scheduled-day cost is $0.018 before rounding, displayed as $0.02. The annual result uses the unrounded value, not $0.02 multiplied by 365. These are example inputs, not measured consumption for a named appliance or a recommended operating schedule.
Safe checks before acting on the result
-
Verify what the standby mode does
Check the owner’s manual for functions that remain active, required continuous power and restrictions on disconnecting the product.
-
Separate cost from achievable savings
The tool estimates consumption already described by your inputs. It does not establish that the mode can be disabled or that the whole amount can be saved.
-
Keep essential equipment powered as required
Do not interrupt refrigerators, freezers, medical equipment or safety devices as a standby-cost experiment. Follow the equipment’s instructions and service requirements.
Frequently asked questions
Can I enter the watts printed on the appliance nameplate?
Only if the documentation explicitly identifies that number as the selected standby mode’s power. Maximum input power and active operating power are different inputs.
Why does the daily result show $0 while the annual result is positive?
A daily amount below half a cent rounds to $0.00 at two decimal places. Annual cost uses the full internal value before rounding.
Does a zero rate mean the device uses no electricity?
No. The energy outputs remain based on watts and time. A zero price changes cost only.
Does the result tell me to unplug the appliance?
No. Safe operation, food preservation and necessary device functions take priority. The calculator does not decide whether disconnecting a product is appropriate.
Sources: Official US public guidance. Calculations and worked examples are editorial arithmetic using stated inputs, not measured model performance or guaranteed savings.
US EIA: Measuring electricity — checked 2026-10-22.
US Department of Energy: Measuring Standby Power — checked 2026-10-22.
Berkeley Lab: What Is Standby Power? — checked 2026-10-22.
Related energy scenarios
Report an error
Thank you! Your feedback helps us make this page better.
Could not send. Please try again.
- Plain-English steps no service-manual jargon
- Model limits and service advice check the exact appliance first
- Safety before maintenance clear limits for owner checks
- Free, no sign-up no repair-service ads in the text