How to Read an Appliance EnergyGuide Label
Use annual kWh and your local electricity price to compare appliance running costs. Keep label estimates separate from actual use and repair diagnosis.
In this guide
- Scope: a cost comparison, not a fault diagnosis
- Read these fields before calculating
- Why watts and kWh are different
- A worked example with invented demonstration inputs
- Make a fair comparison
- Frequently asked questions
- Use the calculation that matches your inputs
- Water differences and complete purchase quotes
An EnergyGuide label helps compare energy use for similar appliances. Its estimated yearly cost is a reference value, not a promise about your utility bill. The FTC explains that actual cost depends on how you use the appliance and the energy price where you live. For an electricity comparison, record annual kilowatt-hours and use the same local rate for both options.
Scope: a cost comparison, not a fault diagnosis
This guide applies when you have an annual electricity-use figure for the appliance or option being compared. A refrigerator label is a useful starting point, but test conditions are not your household’s measured usage. Gas, water, sewer charges and installation work need separate information. An error code, unsafe wiring or poor cooling needs its own troubleshooting response before a purchase comparison.
Read these fields before calculating
| Field | How to use it | Avoid this mistake |
|---|---|---|
| Model and capacity | Compare the actual model and similar capacity or features | Using a label from a different size or variant |
| Annual electricity use, kWh | Enter the yearly energy quantity | Entering watts or the label’s dollar figure as kWh |
| Estimated yearly cost | Read the label’s assumed energy price and usage conditions | Treating it as your exact future bill |
| Local energy rate | Enter the variable electricity price in cents per kWh | Entering 0.18 when the form asks for 18 cents |
| Comparison horizon | Choose a period for a scenario | Presenting that period as a guaranteed appliance lifespan |
Why watts and kWh are different
EIA distinguishes power at a moment, measured in watts, from energy used over time, measured in watt-hours or kilowatt-hours. A nameplate power rating is not an annual energy-use total. Do not multiply a refrigerator’s rated wattage by every hour of a year and present the result as measured consumption. Use the label or a suitable measured annual estimate and state which it is.
A worked example with invented demonstration inputs
Suppose option A uses 600 kWh per year and the entered rate is 18 cents per kWh. The arithmetic is 600 × 18 ÷ 100 = $108 per year, or $9 per average month. An option B at 400 kWh would cost $72 per year at that same rate. The difference is $36 annually. These figures illustrate the calculation; they are not specifications for an LG, Samsung or Whirlpool model and are not a national price estimate.
Make a fair comparison
-
Match the model and label basis
Use comparable annual figures and record whether each comes from an EnergyGuide label or a measured estimate.
-
Use a consistent tariff
Ask the utility if the bill’s units are unclear. Include relevant variable per-kWh charges in the rate; a fixed monthly service fee does not disappear with a more efficient appliance.
-
Separate energy and purchase cost
Compare the electricity difference with the extra upfront cost of option B. Include delivery and installation consistently when defining that extra amount.
-
Review the scenario limits
A flat-rate projection holds use and price constant. It does not estimate future tariff changes, repair bills, financing, resale value or guaranteed service life.
Frequently asked questions
Is EnergyGuide the same as ENERGY STAR?
No. EnergyGuide presents comparison information; the FTC describes ENERGY STAR as an efficiency qualification program. Do not treat the two labels as interchangeable.
Will lower kWh guarantee that replacement pays for itself?
No. The annual difference must be compared with the additional cost and the period you choose. Equal or higher consumption can produce no savings or a negative result.
What if my rate changes by time of day?
A single-rate calculator is a scenario. Use a defensible blended rate for the appliance’s usage or compare separate scenarios; it does not model a time-of-use bill.
Sources: Official US public guidance. Worked examples and arithmetic are editorial illustrations, not measured appliance performance or guaranteed savings.
FTC: How to use the EnergyGuide label — checked 2026-10-22.
US EIA: Measuring electricity — checked 2026-10-22.
Related references and next steps
Choose the actual brand, appliance and full display before using a code procedure.
Use the calculation that matches your inputs
Annual kWh, per-cycle kWh and standby watts describe different measurement boundaries. The cycle tool adds variable water and sewer charges, the standby tool uses a defined idle schedule, and the time-of-use tool compares peak and off-peak energy shares. None supplies a model consumption figure or predicts savings from unsafe operating changes.
Cycle, standby and time-of-use tools
Water differences and complete purchase quotes
Compare water use using documented gallons per cycle at the same workload, and keep variable water/sewer charges separate from fixed fees. For a replacement quote, add only extra delivery, installation, removal, parts and quoted tax not included elsewhere. Neither calculation supplies a lifespan or predicts future repairs.
Water and upfront purchase calculators
Report an error
Thank you! Your feedback helps us make this page better.
Could not send. Please try again.
- Plain-English steps no service-manual jargon
- Model limits and service advice check the exact appliance first
- Safety before maintenance clear limits for owner checks
- Free, no sign-up no repair-service ads in the text