Find your code

Appliance Energy Savings Calculator

Compare two annual electricity estimates and see whether the difference covers option B’s extra upfront cost over your chosen period.

By ApplianceCodeHQ Editorial Updated

Compare option A with option B using annual electricity-use estimates on a consistent basis. B might be an alternative new model or a possible replacement, but its energy savings do not by themselves settle a repair decision. Enter the additional upfront amount for B, not automatically its entire purchase price. The result shows the energy-cost difference over the period you choose after subtracting that extra amount.

Clear the form

Fill in the fields: the result appears under the form.

Formula and sign convention

Annual savings ($) = (A annual kWh − B annual kWh) × rate (cents/kWh) ÷ 100
Period electricity savings = annual savings × selected years
Savings after extra cost = period electricity savings − B extra upfront cost

A positive annual difference means B uses less electricity at the entered rate. A negative annual difference means B costs more to power. The main result can be negative even when B saves energy, because the selected period’s electricity savings may not cover its extra cost. Equal consumption or a zero tariff creates no electricity savings; the tool keeps those results rather than inventing a payback time.

Scope and exclusions

Use comparable capacities, features and annual-use assumptions. A new standardized label and a short measurement of an older machine are not automatically equivalent evidence. The calculation holds the rate and consumption constant and does not model financing, discounting, tax credits, future repairs, gas, water, disposal value or changes in usage. The comparison period is not a guaranteed lifespan.

Cost boundaries matter as much as the arithmetic
Scenario inputHow to define it
A and B annual kWh Use the exact labels or defensible annual estimates; identify the basis for each
Extra upfront cost of B Subtract A’s comparable upfront cost from B’s, with installation and delivery treated consistently
B is cheaper upfront The form accepts a nonnegative premium; use zero for electricity alone and account for B’s purchase-price advantage separately
Selected period A scenario horizon, not a service-life prediction or payback guarantee

Worked examples

With demonstration inputs A = 600 kWh, B = 400 kWh and 18 cents/kWh, the annual electricity saving is $36. Ten unchanged years give $360. If B costs an extra $250 upfront, the result is $110 after that extra cost. Reverse the energy figures and the annual difference becomes −$36; over the same period and premium, the result is −$610. These are illustrative inputs, not manufacturer performance claims.

Safe checks before comparing

  1. Verify each model and annual figure

    Use the actual appliance variant. Do not infer extra consumption from an error code or calculate annual use from nameplate watts alone.

  2. Set consistent cost boundaries

    Decide whether delivery and installation are included on both sides. Do not subtract a full replacement purchase when the intended input is only the price premium between two new models.

  3. Review the non-energy decision

    A diagnosed fault, warranty coverage and physical fit still matter. A positive result does not mean a damaged appliance can safely remain in use.

Frequently asked questions

Why is the main result negative when B uses less electricity?

The savings during your selected period may be smaller than B’s extra upfront cost. The result subtracts that premium.

Does zero annual savings mean an error?

No. Equal energy use or a zero rate produces zero electricity savings. Any entered premium remains a cost.

Is this a payback or lifespan prediction?

No. It compares a fixed scenario over the period you choose and does not forecast how long either appliance will last.

Can I replace a repair quote with this result?

No. Energy cost is one input to a decision after diagnosis. The repair-vs-replace tool addresses a separate rule of thumb with its own limits.

Sources: Official US public guidance. Worked examples and arithmetic are editorial illustrations, not measured appliance performance or guaranteed savings.
FTC: How to use the EnergyGuide label — checked 2026-10-22.
US EIA: Measuring electricity — checked 2026-10-22.

Related tools and evidence

Use the calculation that matches your inputs

Annual kWh, per-cycle kWh and standby watts describe different measurement boundaries. The cycle tool adds variable water and sewer charges, the standby tool uses a defined idle schedule, and the time-of-use tool compares peak and off-peak energy shares. None supplies a model consumption figure or predicts savings from unsafe operating changes.

Cycle, standby and time-of-use tools

Water differences and complete purchase quotes

Compare water use using documented gallons per cycle at the same workload, and keep variable water/sewer charges separate from fixed fees. For a replacement quote, add only extra delivery, installation, removal, parts and quoted tax not included elsewhere. Neither calculation supplies a lifespan or predicts future repairs.

Water and upfront purchase calculators