Find your code

Appliance Time-of-Use Cost Calculator

Compare two-band time-of-use electricity charges with a flat rate using the same kWh and your own share of energy at peak price.

By ApplianceCodeHQ Editorial Updated

Compare electricity charges for the same quantity of energy under two price scenarios: a peak/off-peak plan and a single flat price. Enter total kWh for a period you choose, the share of those kWh charged at the peak rate, both time-of-use prices, and the flat comparison price. EIA explains that some utilities offer time-of-day pricing; the actual rate periods and eligibility come from your own tariff.

Clear the form

Fill in the fields: the result appears under the form.

Formula and positive or negative savings

Peak fraction = peak share (%) ÷ 100
Weighted cents/kWh = peak fraction × peak price + (1 − peak fraction) × off-peak price
Time-of-use cost ($) = total period kWh × weighted cents/kWh ÷ 100
Flat-rate cost ($) = the same total period kWh × flat cents/kWh ÷ 100
Savings versus flat = flat-rate cost − time-of-use cost

A positive savings result means the entered time-of-use mix has lower energy charges. A negative result means it costs more. Zero means equal energy charges, which can occur with equal prices, a particular energy mix or no consumption. The weighted price is a scenario calculation; with zero kWh it is still displayed even though no energy charge is incurred.

Build a comparable input set

This tool supports two price bands, not a complete tariff model
InputWhat to use
Period electricity A measured or defensible kWh estimate for the appliance and a clearly identified period, such as a billing month.
Peak share Peak kWh divided by total kWh, multiplied by 100. Use an energy breakdown or label an assumed mix as a scenario.
Peak and off-peak prices The two applicable variable prices for that period, including comparable per-kWh components.
Flat comparison price A comparable cents/kWh price for the same energy quantity, customer and time period.

A long cycle can cross a rate boundary and consume different amounts of electricity in each stage. Starting a cycle during off-peak hours does not prove that every kWh is off-peak. Do not substitute the number of peak hours in a day for the appliance’s peak energy share. If the share is uncertain, compare explicitly labeled scenarios instead of presenting an assumed mix as measured data.

Worked hypothetical comparison

For 400 kWh with 25% at 30 cents/kWh and 75% at 10 cents/kWh, the weighted price is 15 cents/kWh and the time-of-use cost is $60. A flat 18-cent price costs $72 for the same energy, giving $12 in savings. If all 400 kWh instead falls in the 30-cent peak band, time-of-use cost becomes $120 and savings becomes −$48. These examples demonstrate the sign convention, not a recommended plan or a forecast of appliance use.

Safe checks and scope limits

  1. Match the tariff and period

    Confirm the relevant dates, peak schedule and bill components with your utility. Do not mix a summer peak price with a different season’s comparison rate.

  2. Keep omitted charges separate

    Fixed fees, demand charges, unentered taxes, extra price bands, tiers and changes in consumption are outside the calculation. A lower energy charge does not guarantee a lower whole bill.

  3. Check appliance operation independently

    Follow the owner’s manual and household safety needs. This tool does not recommend unattended operation, interrupting refrigeration or changing a required operating schedule.

Frequently asked questions

Does entering a lower peak share prove I can save that amount?

No. It prices the share you entered. Whether that energy mix is achievable depends on actual use and operating constraints, which this tool does not predict.

Why are savings negative?

The weighted peak/off-peak price is higher than your flat comparison price for the entered energy. Negative savings are retained rather than shown as zero.

Can I compare a plan with three time bands?

Not directly. This form represents exactly two prices. Ask the utility for a comparison that includes all applicable bands and other charges.

Can I use monthly kWh rather than annual kWh?

Yes. The outputs cover whatever period your kWh and rates describe. The tool does not multiply a monthly figure into an annual forecast.

Sources: Official US public guidance. Calculations and worked examples are editorial arithmetic using stated inputs, not measured model performance or guaranteed savings.
US EIA: Measuring electricity — checked 2026-10-22.
US EIA: Prices and Factors Affecting Electricity Prices — checked 2026-10-22.

Related cost tools and evidence